Best Tormek products in the Machine accessories category
On this page you'll find a ranking of the best Tormek products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Tormek KS-123
With the KS-123 angle adjuster for knives, you can set the exact sharpening angle for practically any knife. This patented and ingenious solution allows you to set the exact angle in three simple steps, even for knives with conical blades. It adjusts itself to the diameter of the grinding disc and fits all Tormek machines with a universal support. The calculation of the correct angle is based on exact geometric measurements, so that this analogue angle adjuster is always correct. Setting the grinding angle for knives has never been so easy and precise.
2. Tormek Diamond dressing tool
Diamond dressing tool TT-50, rotates the stone exactly circular and flat, is guided by the universal support, which also guides the fixtures, effortless feed with double knobs.
3. Tormek Grinding device
Centres the knife in the device to achieve maximum symmetry and thus the optimum result, centres and fixes tapered blades, additional stop for high knives, e.g. kitchen cleavers, a slightly convex cutting edge can be formed by a movement between the two stops, robust construction: cast zinc clamps, stops made of fibreglass-reinforced composite material, perfectly balanced. A slightly convex cutting edge can be formed by moving between the two stops, robust construction: clamps made of cast zinc, stops made of glass fibre reinforced composite material, perfectly balanced: most of the weight is distributed over the clamps, which enables a particularly well-balanced sanding process, glides along the universal support with little friction and therefore very smoothly, can be combined with Tormek T-4 and Tormek T-8 as well as older models.
4. Tormek Universal support US-430
Extended universal support for grinding long tools, such as knives, cleavers, and machetes. Fine adjustment with scale for precision setting of the cutting edge angle.
5. Tormek Peel-off paste
One layer is sufficient for 5-10 tools. Then, re-impregnate the polishing disc with a few drops of oil and apply new polishing paste. Work the polishing paste into the leather. Do not let the polishing paste dry out; instead, apply more oil if necessary.
6. Tormek AX-40 sanding device
Amazing how sharp almost any axe can be sharpened with the AX-40 axe sharpening device. The two jaws securely grip the axe head, allowing for easy, symmetrical, and precise sharpening. With the axe device, you can sharpen concave, flat, or convex bevels, depending on what best suits the axe and its intended use. It is suitable for all types of axes, from hatchets to carpenter's axes, carving axes, and broad axes - practically any axe can be perfectly sharpened.
7. Tormek Device
With the SE-77 straight cutter device, it is easy to adjust it to sharpen your chisels and plane blades with a right-angle edge. The design provides the best conditions for successful sharpening with the highest precision in the final result. You can also adjust the device for a slightly convex shape. The SE-77 straight cutter device is an advancement of the SE-76 device. It features an adjustable side that can be fine-tuned using two smaller adjustment screws, allowing for precise adjustments. This may be necessary if the tool does not sit exactly at the angle on the stone, is very narrow, or if the steel is slightly twisted. The fine adjustment can be made in seconds by loosening one of the smaller adjustment screws and tightening the other. The design of the device also allows for positioning and sharpening tapered chisels, such as Japanese chisels. The safety stops securely hold the device on the universal support and prevent the tool from slipping off the grinding stone, eliminating the risk of injury while sharpening. The device is suitable for chisels and plane blades up to 77 mm in width.
8. Tormek Rb-180
The RB-180 allows you to easily rotate and lock the machine at 180°. You can switch between grinding and honing or grinding against or with the edge in just a few seconds. For some tools, grinding should be done against the edge, while for others, grinding with the edge is recommended. With the Tormek RB-180 rotating disc, you can easily turn the machine 180° to set the ideal grinding direction. The rotating disc also facilitates a simple transition from grinding to honing. Honing is always done on the honing wheel with the edge; otherwise, the tool would cut into the leather. The RB-180 is made from three high-performance materials to ensure low friction and high stability. It automatically locks in the desired position. The design prioritizes keeping the RB-180 as thin as possible to avoid changing the working height. You can rotate the machine effortlessly without spilling water. The rubber feet absorb normal vibrations and ensure a secure stand on the table. The RB-180 is compatible with Tormek T-8, Tormek T-7, Tormek T-4, T-3, series 2000 and 1200, as well as the SA-250 and N-1500.
9. Tormek Profile honing wheel
Profile honing wheel LA-120. For honing and polishing the inside of rotary tubes, gouges, and goat feet with a 3 mm radius.
10. Tormek Device for short
The SVS-38 device for short tools has been specifically designed for short carving tools, short chisels, tools for electric carving machines, and smaller straight gouges. With this simple and versatile device, even damaged flat screwdrivers and chisels can be sharpened.
