Best selling Machine accessories from Proxxon
This page always stays fresh and updates automatically.
1. Proxxon Thermocut-Anschlag TA 300
The Thermocut fence is a practical addition to the Thermocut 230/E hot wire cutter. For repeatable and precise production of geometric shapes. For safe cutting of high workpieces. The surface-finished aluminium ensures ideal sliding properties.
2. Proxxon Micro Coordinate Table KT 70
Made of high-strength aluminium with backlash-free adjustable dovetail guides. It features three continuous T-slots (MICROMOT standard 12 x 6 x 5 mm). The sliding ruler facilitates the positioning of the cross slide. Handwheels with a scale ring adjustable to zero: 1 U = 1.0 mm, 1 graduation line = 0.05 mm feed rate. The clamping claws and fastening elements for MB 140/S, MB 200, and TBM 220 belong to this range.
What our customers think
Pro
- Well made
- Great workmanship
- Top quality
3. Proxxon Mounting kit
The complete fastening set for the Primus machine vises includes two T-nuts, two hexagon socket screws, and two universal washers with a turned collar. It is suitable for mounting on the drilling tables of BFB 2000, KT 150, as well as for the bench drill TBH.
4. Proxxon Set of burrs
Selected tungsten-vanadium steel quality. Shank and milled part manufactured from one piece. Precisely ground toothing and optimal concentricity with simultaneous elasticity. Ideal for freehand work. For working soft and hard wood, non-ferrous metals and precious metals as well as plastic and plaster. Ideal for finishing, shaping, profiling and grooving. Optimum cutting speeds depend on the diameter of the respective milling cutter and the material to be processed. The larger the milling cutter, the lower the speed must be. The following applies to the material to be machined: soft material high speed, hard material low speed. The exception is plastic. For clean and powerful clamping of the milling cutters we recommend the use of Micromot steel collets.
5. Proxxon Micromot steel collets
1 piece in sizes 1.0 mm, 1.5 mm, 2.0 mm, 2.4 mm, 3.0 mm, and 3.2 mm. Comes with a clamping nut and a base for storage. Micromot steel collets are hardened and provide high, consistent clamping force. They maintain the required accuracy even after prolonged use and are incomparable to unhardened, 4-slit collets as well as those made of brass or aluminum. The 3-slit design, which is significantly more difficult to manufacture than the 4-slit design, creates a better bed. This is important for the concentric clamping of shafts with a small diameter.
6. Proxxon Step clamping claws
Suitable for clamping workpieces on coordinate tables. Suitable for workpieces with a thickness of up to approximately 35 mm.
What our customers think
Pro
- Very finely crafted
- Good hobby goods
- Very good quality
7. Proxxon Polishing pin cylinder
Felt polishing sticks and felt wheels are designed for pre-polishing and high-gloss polishing of metal, gold, silver, brass, and aluminum using polishing paste. They are also suitable for final polishing in mold and tool making. It is recommended to work at low speeds when polishing. Soften hard polishing paste with oil or warm it slightly. The shaft diameter is 2.35 mm. Made from felt, these tools are ideal for polishing and smoothing surfaces. They are suitable for precious metals, non-ferrous metals, stainless steel, glass, porcelain, wood, rubber, and plastic.
8. Proxxon Roughing attachment
For Micromot devices with a 20 mm system mount. Suitable for grooving, milling grooves, and edge milling. Can be used with a parallel stop (maximum extension 150 mm), for circular milling with a centering pin (100 - 400 mm), or freehand. Features an adjustable depth stop with a preset stroke. Also ideal as a drilling aid for round parts due to the prism in the guide plate.
9. Proxxon kg 50
The rotary table can be rotated up to 45° sideways for making angled cuts. It features an integrated clamping device and jaws with a 27 mm wide prism. The maximum clamping range is 20 mm, and the cutting depth is up to 13 mm. A groove allows for the fixation of model tracks up to H0 scale. It includes an adjustable length stop with a maximum overhang of 140 mm. The set comprises five ceramic bonded cutting discs measuring 50 x 1.0 x 10 mm, suitable for cutting steel, non-ferrous metals, as well as smaller wooden and plastic rods.
10. Proxxon Tool holder for cylindrical grinding
Tool holder for cylindrical grinding on lathes:
Made of steel with a 20 mm MICROMOT system fitting. For precise clamping of the IBS/E or LBS/E drill grinders in the lathe toolholder. Shank dimension 8 x 10 mm. Total length 65 mm.
Machine accessories
Quantity discount
CHF15.– per piece for 2 units
Proxxon Tool holder for cylindrical grinding
Product order
See all products