Best selling Guide rails from Festool
On this page you’ll find a ranking of the best Guide rails from Festool. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Festool Guide rail FS 1400/2
Invented and perfected by Festool: the guide rail. For cuts and grooves that convince with precision. With a sliding surface for smooth running of the machines, a groove for screw and lever clamps or splinter protection for tear-free sawing. Since 1964 the breakthrough in precision and work simplification. The original is available in 8 different lengths from 800 to 5000 mm.
2. Festool Guide rail FS 800/2
Invented and perfected by Festool: the guide rail. For cuts and grooves that convince with precision. With a sliding surface for smooth running of the machines, a groove for screw and lever clamps or splinter protection for tear-free sawing. Since 1964 the breakthrough in precision and work simplification. The original is available in 8 different lengths from 800 to 5000 mm.
3. Festool Angle stop FS-WA/90°
CNC-milled aluminum stop made from a single piece for precise and repeatable 90° cuts. Easy to attach and fully self-aligning. Long edge for easy alignment with all workpiece edges. Notches on the front and back allow for the attachment of FS clamps. For accurate panel cutting when using a guide rail and circular saw. The aluminum stop, milled from a single piece, ensures precise and repeatable right-angle cuts without readjustment. Thanks to the quick-clamping system, the angle stop can be attached to the guide rail in no time and, in combination with a circular saw and saw and work table, becomes a mobile panel saw.
4. Festool Splinter shield FS-SP 1400/T
Tear-free cut, the rubber lip presses the material directly against the cutting edge, thus minimizing material tear-out. Since the splinter guard is notched during the first use, it reflects the exact cutting edge, allowing for precise alignment at the starting point. The replacement splinter guard is self-adhesive and can be easily trimmed. The splinter guard prevents edge tear-out even with angled cuts, and with its help, the guide rail can be precisely aligned at the starting point. To ensure this over time, it must be replaced regularly.
Guide rail
Quantity discount
CHF14.80 per piece for 2 units
Festool Splinter shield FS-SP 1400/T
140 cm
5. Festool Guide rail FS 1900/2
Backlash-free guide - the guide jaws of the plunge saws can be adjusted on the guide rail without tools. Tear-free cut - the rubber lip directly at the scribe prevents tearing of the edges even with angled cuts. Work accurately - the guide stop for routers is available for precise grooves. Fast to the diagonal cut - with guide rail and combination bevel, angles are easily transferred from the workpiece or wall. Invented and perfected by Festool: the guide rail. For cuts and grooves that impress with precision. With a glide lining for smooth running of the machines, a groove for screw and lever clamps or the splinter guard for tear-free sawing. Since 1964, the breakthrough in precision and ease of work. The original is available in 8 different lengths from 800 to 5000 mm....
6. Festool Guide rail FS 2400/2
Play-free guidance - the guide jaws of the plunge saws can be adjusted tool-free on the guide rail. Tear-free cutting - the rubber lip directly at the starting point prevents edge tearing even during angled cuts. Work accurately - for precise grooves, there is a guide stop for routers. Quickly achieve diagonal cuts - with the guide rail and combination square, angles can be easily transferred from the workpiece or wall. Invented and perfected by Festool: the guide rail. For cuts and grooves that impress with precision. With a glide surface for easy machine operation, a groove for screw and lever clamps, or the splinter guard for tear-free sawing. Since 1964, a breakthrough in precision and work facilitation. The original is available in 8 different lengths from 800 to 5000 mm.
7. Festool Cross-cut rail FSK 420
The hand circular saws HK 55, HKC 55, and HK 85 can be easily connected to the crosscut rail as a unit via a quick-release mechanism. Efficient crosscuts are achieved by quickly positioning the saw against the workpiece. With a cutting length of 670 mm, they are also suitable for cutting OSB flooring panels. Repeatable, square crosscuts are ensured through precise guidance. The retract function returns the saw to its starting position after the cutting process. The splinter guard ensures tear-free cutting. The adhesive pad protects the workpiece surface from damage. A sliding surface allows for smooth operation of the machine on the crosscut rail. Click - and it's ready. The Festool hand circular saws HK 55, HKC 55, and HK 85 can be effortlessly coupled with the crosscut rail FSK, available in three lengths (250 mm, 420 mm, or 670 mm). This creates a mobile and easy-to-use crosscut sawing system for precise and square cuts with just a few simple steps. Clamping device FSZ 120.
8. Festool Guide rail FS-KP
Secure hold: the guide rail with adhesive pads - precise and safe sawing even in difficult positions. Practical transport - by attaching the guide rail via the carrying handle of a Systainer. Tear-out-free cut - the rubber lip directly on the tear-out prevents the edges from tearing out even with angled cuts. Glide pad for easy running of the machine on the guide rail. The adhesive pad protects the workpiece surface from damage. Invented and perfected by Festool: the guide rail with adhesive pads. Enables straight and precise cuts when working horizontally on the floor or work surface as well as in wall applications. Easy attachment to different surfaces with the help of the adhesive pads. Easy and practical transport of two guide rails above the carrying handle of a Systainer. The guide rail FS/2-KP is available in lengths of 1400 and 1900 mm. Adhesive pad FS-KP/30
9. Festool Rip fence
When cutting panels, the FS-PA rip fence makes it easy to cut precise strips of exactly the same width up to 650 mm. To do this, the side stops are mounted on the guide rail and the required dimension is set using the adjustable stops. Great time savings when cutting panel strips, as measuring and marking is no longer necessary. Very high precision and repeat accuracy, as the stops always cut exactly to the set dimension. Always perfect results, as fine adjustment of the printed scale is possible. Sturdy and durable thanks to the metal design. For sawing across the width. For fixed cuts, adjustable by means of scale and end stop.
Mounted on the guide rail without tools.
10. Festool Leistenanschlag LA-DF 500/700
No measuring or marking is required, as precise alignment on the workpiece is achieved with the stop. The width of the strips can be easily adjusted using the integrated scale. Quick tool-free assembly on the support table. Versatile use, as the stop fits both the DF 500 and DF 700. Exact fine adjustment during initial installation is possible via set screws. Storage space is already provided in the Systainer of the Domino jointer. Strips are quickly positioned and fixed in the center with the strip stop - ideal for frame connections. The strip stop fits both the DF 500 and DF 700 and accommodates strips between 22 and 70 mm in thickness.
Product order
See all products