Best selling Garden floorings from Sanpro
This page always stays fresh and updates automatically.
1. Sanpro Stelzlager - Plattenlager
The flat rubber pedestal from Sanpro is a professional solution for laying terrace slabs, distinguished by its versatility and high quality. With an outer diameter of 120 mm and a height of 10 mm, this product provides a stable base for various types of floor coverings, including porcelain stoneware, ceramics, natural stone, and concrete. The integrated joint spacers allow for a uniform joint pattern with a joint thickness of 3 mm, facilitating installation and ensuring an attractive appearance. The high-quality, flexible rubber material is weather-resistant and age-resistant, preventing frost damage. Additionally, the pedestal is environmentally friendly, as it is 100% recyclable. These features make it ideal for use on balconies, terraces, walkways, and flat roofs.
- Professional quality "Made in Germany"
- High compressive strength due to large support area
- Nubs on the underside for effective water drainage
- Flexible rubber material, weather-resistant and age-resistant
- Environmentally friendly and 100% recyclable.
2. Sanpro Joint crosses with 1 mm base plate, size 3 mm / height 10 mm, quantity 300 pieces
- Joint crosses with 2 mm joint width, 10 mm height, 50 mm length and 1 mm base (total height = 11 mm).
- For the professional laying of patio slabs / floor tiles with a uniform joint pattern.
- Professional quality "Made in Germany".
- Thanks to the predetermined breaking point, this laying aid can also be used as a T-piece.
- The crosses are held in position with the base plate and cannot move upwards.
- The larger contact surface also means that the joint crosses can no longer be pressed down so easily.
- The low design with base is ideal for loose laying of large-format flat tiles.
- Made from weather and age-resistant black plastic.
Features:
- For laying patio / floor slabs with an even joint pattern
- Made from weather and age-resistant black plastic
- The crosses are held in position by the base plate
- Attached predetermined breaking point - can therefore also be used as a T-piece in the edge area
- Low design is ideal for loose laying of large-format flat slabs
-----------------------------
Selection criteria:
Size: 3 mm / height 10 mm
Quantity: 300 pieces
-----------------------------
Technical Data:
Weight: 960 g
Art.-Nummer: 95214-4260632237960
Shop number: 196481.
Garden flooring
CHF27.89
Sanpro Joint crosses with 1 mm base plate, size 3 mm / height 10 mm, quantity 300 pieces
3. Sanpro Joint crosses with 1 mm base plate, size 2 mm / height 10 mm, quantity 500 pieces
Tile spacers with a 2 mm joint width, 10 mm height, 50 mm length, and 1 mm base (total height = 11 mm).
For the professional installation of terrace slabs and floor tiles with a uniform joint pattern.
Professional quality "Made in Germany".
Thanks to the built-in breaking point, this laying aid can also be used as a T-piece.
The base plate keeps the spacers in position and prevents them from moving upwards.
With the larger support surface, the tile spacers are also less likely to be pushed down easily.
The low-profile design with a base is ideal for the loose laying of large-format flat tiles.
Made from weather-resistant and aging-resistant black plastic.
Selection criteria:
Size: 2 mm / Height 10 mm
Quantity: 500 pieces
Technical data:
Weight: 1.6 kg.
Garden flooring
CHF34.24
Sanpro Joint crosses with 1 mm base plate, size 2 mm / height 10 mm, quantity 500 pieces
4. Sanpro Fugenkreuze
Joint spacers make spacing joints when laying stone, concrete and patio slabs child's play.
They make it easy to lay patio slabs without the need for additional tools.
The cross spacers are available in various joint widths (3, 4, 5, 6, 8 or 10 mm) and a joint height of 20 mm.
Thanks to the prefabricated predetermined breaking point, the cross spacers can also be used as a T-piece for the edge area.
The hard plastic makes the cross spacers particularly weather-resistant and durable.
They are 100% recyclable and of professional quality, manufactured in Germany.
Material: Hard plastic.
Colour: black.
Length: 50 mm.
Selection criteria:
Joint width: 5 mm / height 20 mm.
Quantity: 100 pieces.
Technical data:
Weight: 0 g.
Item number: 96714-01-019.
Shop number: 145692.
5. Sanpro Low joint crosses, - yes, joint width 3 mm / height 10 mm, quantity 100 pieces
Joint crosses with a 2 mm joint width and 10 mm height.
Designed for easy laying of stone slabs, concrete slabs, or patio slabs with a defined and even joint.
Professional quality made in Germany.
Can also be used as a T-piece for the edge area thanks to the predetermined breaking point.
Material: black hard plastic (other colors available on request from 100,000 pieces).
Simple, cost-effective installation as no additional tools or equipment are required.
Resistant to weathering and aging, and environmentally friendly as it is 100% recyclable.
Length: 50 mm.
Selection criteria:
Base plate: yes
Joint width: 3 mm / height 10 mm
Quantity: 100 pieces
Technical data:
Weight: 320 g.
Garden flooring
CHF24.17
Sanpro Low joint crosses, - yes, joint width 3 mm / height 10 mm, quantity 100 pieces
6. Sanpro Joint crosses, joint width 3 mm / height 20 mm, quantity 100 pieces
Joint spacers make the even installation of joints a breeze when laying stone, concrete, and patio slabs.
Easy and cost-effective installation of patio slabs without additional tools.
The spacers are available in various joint widths (3, 4, 5, 6, 8, or 10 mm) and a joint height of 20 mm.
Thanks to the factory-set breaking point, the spacers can also be used as T-pieces for edge areas.
The hard plastic makes the joint spacers particularly weather-resistant and durable.
100% recyclable.
Professional quality made in Germany.
Material: Hard plastic.
Color: Black.
Length: 50 mm.
Selection criteria:
Joint width: 3 mm / Height 20 mm.
Quantity: 100 pieces.
Technical data:
Weight: 890 g.
7. Sanpro Low joint crosses, base plate - no, joint width 2 mm / height 10 mm, quantity 100 pieces
Spacer crosses with a joint width of 2 mm and a height of 10 mm.
Designed for the easy installation of stone slabs, concrete slabs, or patio tiles with a defined and uniform joint.
Professional quality, made in Germany.
Can also be used as a T-piece for the edge area thanks to the predetermined breaking point.
Material: Black hard plastic (other colors available upon request for orders of 100,000 pieces or more).
Simple, cost-effective installation as no additional tools or equipment are required.
Weather and aging resistant, as well as environmentally friendly, being 100% recyclable.
Length: 50 mm.
Selection criteria:
Base plate: No
Joint width: 2 mm / Height 10 mm
Quantity: 100 pieces
Technical specifications:
Weight: 210 g.
Garden flooring
CHF23.52
Sanpro Low joint crosses, base plate - no, joint width 2 mm / height 10 mm, quantity 100 pieces
8. Sanpro Joint crosses with 1 mm base plate, size 3 mm / height 10 mm, quantity 500 pieces
Cross spacers with a 2 mm joint width, 10 mm height, 50 mm length, and 1 mm base (total height = 11 mm).
For the professional installation of patio and floor tiles with a uniform joint pattern.
Professional quality "Made in Germany".
Thanks to the integrated breaking point, this installation aid can also be used as a T-piece.
The base plate keeps the spacers in position and prevents them from moving upwards.
Due to the larger support surface, the spacers cannot be easily pushed downwards.
The low-profile design with a base is ideal for the loose laying of large-format flat tiles.
Made from weather-resistant and aging-resistant black plastic.
Features:
- For the installation of patio and floor tiles with a uniform joint pattern
- Made from weather-resistant and aging-resistant black plastic
- The base plate keeps the spacers in position
- Integrated breaking point - can also be used as a T-piece in edge areas
- Low-profile design is ideal for the loose laying of large-format flat tiles
Selection criteria:
Size: 3 mm / Height 10 mm
Quantity: 500 pieces
Technical data:
Weight: 1.6 kg.
Garden flooring
CHF34.24
Sanpro Joint crosses with 1 mm base plate, size 3 mm / height 10 mm, quantity 500 pieces
9. Sanpro Joint crosses, joint width 4 mm / height 20 mm, quantity 100 pieces
Joint crosses make even joint spacing child's play when laying stone, concrete, and patio slabs.
Simple and cost-effective laying of patio slabs without any additional tools.
Cross spacers are available in different joint widths (3, 4, 5, 6, 8, or 10 mm) and joint heights of 20 mm.
Thanks to the prefabricated predetermined breaking point, the cross spacers can also be used as a T-piece for the edge area.
The hard plastic makes the joint crosses particularly weather-resistant and durable.
100% recyclable.
Professional quality made in Germany.
Material: hard plastic.
Colour: black.
Length: 50 mm.
Selection criteria:
Joint width: 4 mm / height 20 mm.
Quantity: 100 pieces.
Technical data:
Weight: 0 g.
Item number: 96714-01-016.
10. Sanpro Joint crosses, joint width 6 mm / height 20 mm, quantity 100 pieces
Joint spacers make the even installation of joints when laying stone, concrete, and patio slabs a breeze.
Easy and cost-effective installation of patio slabs without additional tools.
The cross spacers are available in various joint widths (3, 4, 5, 6, 8, or 10 mm) and a joint height of 20 mm.
Thanks to the pre-defined breaking point, the cross spacers can also be used as T-pieces in the edge area.
The hard plastic material makes the joint spacers particularly weather-resistant and durable.
100% recyclable.
Professional quality, made in Germany.
Material: Hard plastic.
Color: Black.
Length: 50 mm.
Selection criteria:
Joint width: 6 mm / Height 20 mm
Quantity: 100 pieces.
Technical data:
Weight: 0 g.
Article number: 96714-01-017.
Product order
See all products