Best KobrePond products in the Fountain + garden pond category
On this page you'll find a ranking of the best KobrePond products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. KobrePond Algae Killer
KobrePond Algae Killer 1 litre for 20'000 litres. Area of application: Excessive algae growth leads to oxygen deficiency and can thus harm fish and plants. KobrePond Algenkiller is effective against the most common types of algae such as filamentous algae, floating algae and smear algae. KobrePond Algenkiller inhibits the photosynthesis of the algae and causes them to die. Suitable for all garden ponds, swimming ponds, ornamental fountains and water basins. Recommendation for use: Shake well before use. Distribute the care product as evenly as possible in the water. After use, remove dead algae with a net. Ensure sufficient oxygen supply. Switch off the UV-C clarifier for at least 7 days during treatment. Avoid changing the water as much as possible. For optimal results, we recommend regular re-dosing at intervals of approx. four weeks. During application, a slight foaming may temporarily occur in waterfall intakes. Federal approval number CHZN5602. Use biocide safely and always read the label and product information before use.
2. KobrePond OxyActiv
KobrePond OxyActiv 5 kg quickly removes filamentous algae. After application, KobrePond OxyActiv settles on the filamentous algae. A rapid oxidation process begins, which destroys the cell structure of the algae, causing them to die off. Additionally, KobrePond OxyActiv biologically enriches the water with sufficient oxygen. This promotes healthy decomposition of algae and waste products. The increased oxygen supply allows the decomposing bacteria to work faster and more effectively, significantly enhancing the filtration performance.
Application: Spread approximately 100 g of granules per m² evenly over the water surface. The granules will sink and bring algae, filamentous algae, leaves, etc., to the surface of the water. These can then be skimmed off with a net or scoop. The application can be done year-round and additionally supplies the pond with oxygen. When used as directed, the active solution poses no danger. Do not use if the pH value is above 8.5. Use algicides safely. Always read the label and product information before use. Suitable for both private and commercial applications. Important: Treat small and shallow ponds in multiple stages to avoid pH fluctuations.
3. KobrePond Pond Clear
Application area: For the immediate removal of color and turbidity substances of all kinds. Kobre Pond Clear quickly creates crystal clear water by flocculating the turbidity substances. Fine particles and color molecules are bound, making them filterable. Additionally, the algal nutrient phosphate is also bound. Application recommendation: Distribute Kobre Pond Clear as evenly as possible in the pond. The effect sets in quickly. If necessary, repeat the application until the desired effect is achieved. Pond Clear works independently of water temperature. It may temporarily cause a milky turbidity in the pond water during application. Do not use in ponds with sturgeon. Ensure good aeration of the pond and do not feed fish during application. Application in fish ponds: Kobre Pond Clear achieves the best effect with low water circulation. A high fish density and/or significant water movement can delay the effect. The bound suspended particles may only settle on the bottom to a limited extent. Water temperature: Effective regardless of water temperature. Dosage: 500 ml per 5000 liters of pond water. Repeat if necessary until the desired effect is achieved. Important: Do not use in ponds with sturgeon. Ensure good aeration of the pond and do not feed fish during application.
4. KobrePond Sludge killer
KobrePond Sludge Remover 500 ml for 10,000 liters. Application area: Dead plant residues, leaves, feed, or fish excretions lead to unsightly and harmful sludge deposits in the pond. This also promotes algae growth. The sludge layer is constantly low in oxygen, making it difficult for the sludge to decompose on its own. KobrePond Sludge Remover works on a biological basis with microorganisms and oxygen. This helps eliminate sludge deposits. Application recommendation: Evenly spread KobrePond Sludge Remover over the sludge-affected areas. The granules work locally. If necessary, repeat the application until the desired effect is achieved. Sludge remover is most effective at water temperatures above 15 °C. In colder water, the breakdown of sludge takes longer due to lower bacterial activity. Water temperature: Optimal effect from 15 °C. Dosage: 500 ml per 10,000 liters of pond water. Repeat after approximately 14 days until the desired effect is achieved.
5. KobrePond Starterbakterien
Kobre® Pond Starter Bacteria 100 g for 10,000 liters. Application area: Kobre® Pond Starter Bacteria is a high-performance bacterial concentrate with rapid action. It quickly brings your filter to peak performance. Especially recommended after a filter restart, in spring, or after medication use. Kobre® Pond Starter Bacteria significantly shortens the filter's startup time. The starter bacteria support the rapid breakdown of ammonium/ammonia and nitrite. Important: Turn off UV-C lights during the first five days. Application recommendation: Evenly distribute the contents of the canister over the wet filter material. Resume circulation after about 30 minutes. Alternatively, the granules can also be sprinkled in the inflow area of the filter. Water temperature: Optimal effect from 15 °C water temperature. Dosage: Contents for 10,000 l pond water.
6. KobrePond Ausströmerkugel
Diffuser ball with a 4mm connection, diameter 50mm. The diffuser ball is the classic among diffusers. The porous material generates optimal enrichment of the water with oxygen.
7. KobrePond Plant island unplanted
Plant island unplanted, approximately 60 cm, green. The plant island serves as sun protection for your fish, as traditional koi ponds usually lack plant zones. Plant islands are also very decorative and give an unplanted pond an idyllic appearance. The roots provide an additional natural filtering effect. The island is made of a lightweight carrier material that does not leach harmful substances into your pond water. Planting is simple: remove marsh plants that are located in shallow water from the soil and place them on the island. In autumn, you can trim the plant island in height and, if necessary, also on the sides. The island with plants should remain in the pond during winter.
8. KobrePond Starterbakterien Pearls
Kobre®Pond Starter Bacteria Pearls 1 liter is sufficient for 20'000 liters. Area of application: For building up the bacterial strains in the filter and pond. The Pearls have the unique property of continuously releasing important microorganisms over several weeks. Thus you support the filter biology sustainably in the degradation of dangerous nitrogenous substances such as ammonium and nitrite and achieve an extremely positive effect in terms of water quality. Recommendation for use: Kobre®Pond Starter Bacteria Pearls can be used all year round to support nitrification. In any case, however, in spring as well as when restarting the filter. Ideally, the Pearls are placed in the biochamber of the filter. When stocking fish, it is not advisable to put the Pearls directly into the pond. The fish may mistakenly recognize them as food and eat them. Important: Due to the way the product works, it is not necessary to turn off the UV-C lamp. Water temperature: The optimal effect is achieved at temperatures > 15°C. Dosage: 1 liter of Kobre®Pond Starter Bacteria Pearls is suitable for a water quantity of approx. 20000. The preparation cannot be overdosed. After a few weeks, when the Pearls have dissolved, the dosage can be increased.
9. KobrePond Water conditioner
Kobre®Pond Water Conditioner 500ml prepares pond water in a fish-friendly manner. Application area: Kobre®Pond Water Conditioner quickly creates a healthy pond environment in fish ponds. It is essential during refilling, water changes, heavy rainfall, or medication treatments. Kobre®Pond Water Conditioner strengthens the immune system of the fish and prevents pathogens. It particularly protects the gills, skin, and fins of the fish. High-quality humic acids bind toxic heavy metals such as copper. Application recommendation: Distribute Kobre®Pond Water Conditioner evenly in the pond. Do not use simultaneously with biocidal products or medications. Water temperature: Effective regardless of water temperature. Dosage: 5 liters per 100,000 liters of pond water.
10. KobrePond Air distribution tap
The KobrePond air distribution valve is an effective accessory for wells and garden ponds that allows for individual regulation of the air outlets. This product is specifically designed for the Alita 15 aeration pump and provides a reliable solution for pond aeration. The air distribution valve is made of a chrome-plated brass pipe and is equipped with stainless steel shut-off valves, ensuring long life and corrosion resistance. With five connections that have a diameter of 4 mm, it allows for flexible adjustment of the air supply to various outlets. The low-pressure air distributor is ideal for efficient aeration of pond systems and contributes to improved water quality.
- Chrome-plated brass pipe for increased durability
- Stainless steel shut-off valves for reliable operation
- Low-pressure air distributor for optimal pond aeration
- Five connections with a 4 mm diameter for flexible use.
