Best selling Fall protection from MAS
On this page you'll find a ranking of the best MAS products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. MAS Fall protection set
EN 363 - consisting of safety harness MAS 10 (art. no. 4000 385 010), EN 361, fall arrester MAS SK12 10 m (art. no. 4000 385 103 ), EN 352-2, anchor strap B2 (art.No. 4000 385 099) - 2 m long, sheet steel case - These products are tested and approved for vertical and horizontal use with an expected stress due to a fall over the edge. Further technical characteristics: - Application: for vertical and horizontal use - subject to testing: yes.
2. MAS BFD lanyard Tyger Twin L.2m EN354 EN355
EN 354, EN 355 · with a 27 mm wide webbing · the band shock absorber reduces the impact forces well below the permitted maximum values (600 kg) · this version comes with two scaffold tube hooks (according to EN 362) with an opening width of 65 mm at the end of the strap to ensure quick and safe attachment during ascent · in the event of a fall, the interwoven webbing straps open and evenly absorb the forces that occur · Areas of application: the band shock absorber connecting device is primarily intended for climbing, allowing the user to secure themselves against falls during ascent or descent using the two outgoing webbing straps; when working, both strap ends must be hooked at the anchor point · Additional technical features: · Application: edge tested · Maximum lifespan/years: 10 · subject to inspection: yes.
3. MAS Guided type fall arrester SK 12 EN353-2 L.20m rope-D.12mm (31820)
EN 352-2 - Free-running fall arrest device with an attached energy absorber that reduces the impact forces occurring during a fall. The device is supplied complete with a core-sheathed rope of Ø 12 mm. It is primarily used in climbing areas, allowing the user to keep both hands free to transport materials or when the anchor point is further away from the workplace. Additional technical specifications: Standard: EN 353-2, maximum lifespan/years: 4-6, inspection required: yes.
These products are tested and approved for vertical and horizontal applications with expected stress from a fall over the edge.
Fall protection
CHF122.10
MAS Guided type fall arrester SK 12 EN353-2 L.20m rope-D.12mm (31820)
Fall-arrest device, 136 kg
4. MAS Full body harness 63 Var. S Economie
Safety harness MAS63 Var.S Economy EN361 EN358 4-point 100/140 mm back for size 1 (48-56): EN 361 + EN 358. Featuring a 100/140 mm padded back, two attachment points (front and back), and two side positioning rings that allow the user to position their workspace. An additional variable adjustable fall protection ring on the waist belt is approved for use with fixed climbing systems. Adjustable shoulder straps, leg straps, and a seat belt. Pass-through frame on the waist and leg straps. Additional technical specifications: Maximum lifespan: 6-8 years, inspection required: yes.
5. MAS Guided type fall arrester SK 12 EN353-2 L.15m rope-D.12mm
EN 352-2 - A self-retracting fall arrest device with an attached energy absorber that reduces the impact forces occurring during a fall. The device is only supplied complete with a core-sheathed rope of Ø 12 mm. It is primarily used in climbing areas, allowing the user to keep both arms free to transport materials or when the anchor point is further away from the workplace. Additional technical specifications: Design: movable guide, Standard: EN 353-2, Maximum lifespan in years: 4-6, Inspection required: yes.
Fall protection
CHF112.82
MAS Guided type fall arrester SK 12 EN353-2 L.15m rope-D.12mm
Fall-arrest device, 136 kg
6. MAS Travelling Safety Catcher SK 12
Guided type fall arrester MAS SK 12 EN353-2 with a 10m rope and 12mm diameter. This free-running fall arrester features a sewn-on energy absorber that reduces the impact forces occurring during a fall. The device is supplied complete with a kernmantle rope of 12mm diameter. It is primarily used in climbing areas, allowing the user to keep both arms free for tasks such as transporting material or when the anchorage point is further away from the workplace.
- Standard: EN353-2
- Service life: 4-6 years
- Requires testing: Yes.
7. MAS Safety harness 33
EN 361 · a harness with a front and rear attachment point · height adjustment of the front attachment point as well as adjustment options for the shoulder straps, leg straps (with pass-through frame), and the pelvic strap Additional technical specifications: · Design: 2-point · Standard: EN361 · Maximum lifespan/years: 6-8 · subject to inspection: yes.
8. MAS Trauma strap for attachment to any harness
EN 354 - Type 2 - with delta emergency lanyard - accessory for suspension relief in the harness - 2 pieces recommended per harness. Every time a fall arrest system is used, there is a risk of a fall in which the user is safely caught. A person who has fallen and hangs motionless in their harness for longer than 15-20 minutes can suffer a life-threatening shock and skin trauma. This means that the blood sinks into the legs and cannot flow back again. When used, the trauma band provides support and improves blood circulation (the person can move and tense the leg muscles) until they are rescued.
Further technical features:
- Application: Prevention of suspension trauma
- Design: For attachment to any harness.
9. MAS Guided type fall arrester S 16 EN353-2 L.10m rope-D.16mm
EN 353-2 - Free-running fall arrest device with an attached energy absorber that reduces the impact forces occurring during a fall. The device is only supplied complete with ropes of 16 mm diameter. It is primarily used in climbing areas, allowing the user to have both arms free to transport materials or when the anchor point is further away from the workplace. These products are tested and approved for vertical and horizontal use with expected stress from a fall over an edge. Additional technical specifications: Application: primarily in climbing areas, Design: movable guide, Standard: EN353-2, Maximum lifespan/years: 4-6, Certification required: yes.
Fall protection
CHF151.22
MAS Guided type fall arrester S 16 EN353-2 L.10m rope-D.16mm
Fall-arrest device, 136 kg
10. MAS Retractable type fall arrester EN 360 galvanised steel cable,4,5m
EN 360 is a device housed in plastic with a swivel suspension and wire rope, designed for work on high-rise structures, chimneys, or silos. It should be attached overhead to ensure proper function. The wire rope automatically extends from the robust housing and retracts when descending. Due to the short braking distance, no additional fall damping is required. These products have been tested and approved for both vertical and horizontal use, with an expected stress due to a fall over the edge.
Further technical features include:
- Material: plastic
- Connecting element for fall-arrest eyelet on the harness: automatic carabiner made of aluminum
- Weight: approximately.
Fall protection
CHF259.62
MAS Retractable type fall arrester EN 360 galvanised steel cable,4,5m
Height safety device