Best selling Abrasives from Eisenblätter
On this page you'll find a ranking of the best Eisenblätter products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Eisenblätter MAGNUM DecoFinish grinding wheel 125 mm x M14 thread
Excellent for all metals (VA, steel, non-ferrous metals, etc.) as well as hard plastics and wood.
Very fine sanding with simultaneous smoothing of scratches, small welds, and welding spots.
Perfect removal of paint, rust, and oxides while ensuring a perfect finish.
Cold sanding behavior, therefore no dulling colors.
Perfect adaptation to the workpiece due to viscoelastic properties.
Simple, quick, and convenient disc change due to integrated M14 thread.
The elastic support disc made of high-tech natural fibers is gentle on the user, can be completely trimmed for full use of the disc, and dampens noise and vibrations.
Thanks to the open-pore construction, particularly fine and decorative surface grinding can be achieved in no time on all metals, as well as on hard plastics and wood. Depending on the pressure applied, fine welds and weld seams or deep scratches can be removed directly. Thanks to the particularly fine finish, a perfect mirror-like shine can be achieved immediately with polishing discs if required. This saves time-consuming intermediate sanding and polishing steps. Even thick layers of paint with filler on body parts are removed down to the bare metal sheet.
The underlying metal has a perfect finish and can be repainted immediately. Rust and oxide layers are no obstacle to a perfect finish either, thanks to MAGNUM® DecoFinish. This new compact fleece is universal and versatile. It is extremely tough and durable, does not grease, and also has elastic and cooling properties for perfect adaptation to the workpiece and smooth sanding transitions.
Technical data:
Ideal speed: 2,000 - 4,000 min-1
Max. rotational speed: 4,500 min-1
Approval: 30 m/sec
Material thickness: 13 mm
Supporting surface: natural fibers
Dimensions: 125 mm x M14.
2. Eisenblätter TRIMFIX Fleece Flap grinding disc, 125 x 22.2 mm, 1FOR2 extra coarse, K40
High-quality surface conditioning (SC) non-woven material for extremely long service life.
Perfect introduction to subsequent high and mirror polishing of stainless steel.
Large effective contact surface for improved heat dissipation.
Ideal for internal edge rounding.
Fine sanding to a matt finish in all grit gradations.
Elastic natural fibre high-tech compound backing pad is gentle on the user, can be completely trimmed for full use of the disc, and is noise and vibration damped.
With grit 1FOR2 extra coarse (green), thin weld seams and spots can be easily removed thanks to the ceramic grit content.
Technical data:
Ideal speed: 2,000 - 5,000 min-1.
Max. speed: 12,200 min-1.
Approval (DIN EN 13743): 80 m/sec.
Carrier plate: natural fibre.
Dimensions: Diameter 125 x 22.2 mm.
Abrasives
Quantity discount
CHF13.30 per piece for 2 units
Eisenblätter TRIMFIX Fleece Flap grinding disc, 125 x 22.2 mm, 1FOR2 extra coarse, K40
1FOR2 extra coarse
3. Eisenblätter Cleaning disc MAGNUM CLEAN-MIX, 125 mm
Fine-grained clean nylon fiber material with intermediate layers of ceramic grinding fabric for higher material removal performance and a significantly longer lifespan while maintaining a consistent grinding pattern.
Ideal for cleaning and refreshing wooden surfaces, boat bottoms, removing shell lime, etc.
The outer diameter of the disc is adjustable.
Intermediate layers of grinding flaps, tailored to the CLEAN material, ensure even wear and thus a constant grinding pattern.
The fastest way to derust, deburr metals, etc.
Cleaning and refreshing wooden surfaces in no time.
Newly developed cleaning disc with intermediate layers of grinding flaps. For a stronger cleaning effect and a longer lifespan of the discs. The open, elastic pores of the CLEAN material prevent the grinding disc from clogging and create a sandblasting effect on metal.
The elastic backing disc made of natural high-tech fibers is gentle on the user (CO2-neutral), can be fully trimmed for complete use of the disc, dampens noise and vibrations, and features a practical M14 thread for tool-free and quick attachment of the disc.
Thanks to the integrated M14 thread, no clamping nut is required - eliminating contamination risks from contact between the workpiece and the steel clamping nut.
Technical data:
Ideal speed: 2,000 - 4,500 min-1
Max speed: 4,500 min-1
Approval: 30 m/sec
Material thickness: approx. 15 mm
Backing pad
Natural fibers
Grit: 80 Strone
Dimensions: Diameter 125 mm x M14.
4. Eisenblätter Šlifavimo velenas GERD Poly-PTX Ceramic 105x100mm P40
The GERD Poly-PTX Ceramic Flap Grinding Disc is a highly developed grinding tool specifically designed for processing stainless steel. With a diameter of 105 mm and a ceramic grain, this grinding disc offers efficient and precise processing that results in a very smooth and shiny surface finish in a short amount of time. The innovative vibration-damping core construction ensures comfortable handling and reduces fatigue during use. This flap grinding disc is ideal for professionals and craftsmen who value quality and efficiency.
- Vibration-damping core construction for improved comfort
- Efficient processing of stainless steel with ceramic-based abrasive
- Maximum speed of 5000 RPM for quick results.
