Xyladecor Wood Protection Stain Walnut 4 L

Universal all-weather protection: The impregnation effect reduces the wood's ability to absorb water by more than 30%.

The result: Extra protection against moisture and humidity, as water beads off, allowing the wood to stay beautiful longer. Re-glaze when weathering is visible, but at the latest when cracks appear in the wood. This preserves the impregnation and ensures the wood is permanently protected.

Fields of application: Suitable for new and old wood outdoors, including facades, screens, fences, carports, garden sheds, and more. The special formula of Xyladecor Wood Preservative Stain, with its micro pigments, penetrates deeply and protects from the inside. A primer is usually not necessary.

Processing: Remove thick and chipped, non-supporting old coats. Tie back plants. Use only in well-ventilated areas and ensure good ventilation during and after application. Cover the workplace with foil or paper. Brush off or wipe off dust and dirt. For raw, untreated softwoods, we recommend pre-treatment with a primer from Xyladecor. Never paint directly weathered wood with the colorless grade only. Only the colored grades of Xyladecor protect the wood from graying.

Please stir or shake Xyladecor Wood Protection Stain well before use. Apply undiluted with a soft flat brush in the direction of the wood grain. Only use material with the same batch number on one surface. An even surface can also be obtained by finishing with a squeezed-out brush approximately 30-40 minutes after treatment. Apply at least 2 coats of Xyladecor Wood Protection Stain. Allow to dry for approximately 12 hours before applying the next coat. Always keep the can tightly closed after painting. Use up any remaining quantities soon.

Ingredients: Alkyd resins, vegetable oils, inorganic pigments, water, aliphatics, additives, and preservatives.

Consumption for 2 coats: 0.75 l is sufficient for approximately 5 m², 2.5 l for approximately 16 m², and 5 l for approximately 31 m².