Xyladecor Wood preservative glaze teak 4 L

Universal all-weather protection:
The impregnation effect reduces the wood's ability to absorb water by more than 30%.

The result:
Extra protection against moisture and humidity, because water beads off, the wood stays beautiful longer. Re-glaze when weathering is visible, but at the latest when cracks are visible in the wood. This preserves the impregnation and the wood is permanently protected.

Fields of application:
For new and old wood outdoors: facades, screens fences, carports, garden sheds and much more. The special formula of Xyladecor Wood Preservative Stain with its micro pigments penetrates particularly deeply and protects from the inside. A primer is therefore usually not necessary.

Processing:
Remove thick and chipped, non-supporting old coats. Tie back plants. Use only in well ventilated areas. Ensure good ventilation during and after application. Cover workplace with foil or paper. Brush off or wipe off dust and dirt. For raw, untreated (e.g. non-impregnated) softwoods, we recommend pre-treatment with a primer from Xyladecor. Never paint directly weathered wood with the Colorless grade only. Only colored grades of Xyladecor protect the wood from graying.

Please stir or shake Xyladecor Holzschutz-Lasur well before use. Apply Xyladecor Holzschutz-Lasur undiluted with a soft flat brush in the direction of the wood grain. Only use material with the same batch number (see label) on one surface. An even surface can also be obtained by finishing with a squeezed-out brush approx. 30-40 minutes after treatment. Apply at least 2 coats of Xyladecor Wood Protection Stain. Allow to dry for approx. 12 hours before applying the next coat. Always keep can tightly closed after painting. Use up any remaining quantities soon.

Ingredients:
Alkyd resins, vegetable oils, inorganic pigments, water, aliphatics, additives and preservatives.

Consumption for 2 coats:
0.75 l is sufficient for approx. 5 m², 2.5 l for approx. 16 m² and 5 l for approx. 31 m².