Votronic 6065 StandBy-Charger 24V

The VOTRONIC StandBy-Charger is designed for the automatic recharging and maintenance of the starter battery or auxiliary battery when the mains charger, solar charge controller, or generator has only one charging output. The device can be easily retrofitted by simply connecting it between the on-board and starter battery or between the on-board and auxiliary battery, without needing to change the existing wiring. For example, when the mains charger is in operation and charging the on-board battery, a small portion of the charging current will also charge the second battery (starter battery or auxiliary battery) depending on the charging state. This maintenance charging operates automatically and is indicated by an increased voltage level of the second battery. Overcharging of the second battery is excluded, as the charging voltage is reduced by at least 0.6 V, and the charging current is limited to 3 A (2 A for the 24 V variant). Ensure that both batteries have the same nominal battery voltage of 12 V / 12 V or 24 V / 24 V, as mixed operation of 12 V and 24 V is not possible. Note: The StandBy-Charger is exclusively suitable for use with lead batteries (acid / gel / AGM technology), and not for the combination of LiFePO4 and lead (starter) batteries.

Technical data:

• Votronic number: 6065
• Operating voltage: 24 V
• Charging current in standby mode for starter battery: 0 - 2 A
• Operating temperature range: -20 / 40 °C
• Protection class: IP20
• Dimensions: 90 x 60 x 38 mm
• Weight: 52 g
• Humidity: max. 95 % RF, non-condensing
• Certification marks: CE, E-approval (EMC/automotive directive).