Voltcraft Measuring device set for motors & drives

The VOLTCRAFT measuring device set is specifically tailored to the measurement requirements for testing motors and drives. The insulation tester provides test voltages of up to 1000 V and can measure insulation resistance up to 20 GΩ. With the current clamp, suitable for both AC and DC currents up to 400 A, the current consumption of motors and drives can be accurately determined. The VOLTCRAFT VC35 phase sequence tester reliably indicates the direction of the rotating field, preventing damage to motors and drives during commissioning due to incorrect rotating field direction. The measuring equipment is securely stored in the VOLTCRAFT measuring device bag, which also ensures comfortable transport to the job site.

Insulation Tester ET-200: Measure insulation resistances of up to 20 GΩ with test voltages of 50/100/250/500/1000 V. Additionally, the ET-200 allows measurement functions for AC and DC voltages up to a maximum of 600 V in CAT IV and for resistances up to 20 kΩ. An optional remote release test lead enables the insulation measurement to be triggered directly at the test tip, so the ET-200 does not need to be held in hand during measurement. The soft rubber protection makes the device ideally protected against impacts.

Phase Sequence Tester VC35: An automatic testing device for displaying and checking the phase sequence and rotating field direction of the outer conductors in industrial electrical installations.

Release Test Lead for Insulation Tester ET-200: The test lead allows the insulation measurement on the ET-200 to be triggered directly at the test tip. The measuring device does not need to be held in hand, allowing the user to fully concentrate on the measurement.

AC/DC Current Clamp VC-523: For easy and quick measurement of AC and DC currents up to 400 A. Unlike multimeters, the circuit does not need to be interrupted during measurement.