Tox Thermo Proof Plus spacer mounting system M16x400 mm 8 pieces

Features
• Approved for construction supervision
• Variable M10 or M12 threaded rod connection
• The only approved spacer fastening with M10 thread connection, as commonly used for French balconies
• Up to 250% more power than competitor products
• Suitable for thick insulation layers and spacer installations up to 300 mm
• Safe protection against rust, energy loss, and thermal bridges due to stainless steel A4

Description & Application Area
• Heavy-duty spacer fastening for insulation, brickwork, and flat roofs
• Practically no energy loss and no thermal bridges due to stainless steel A4
• Construction supervision approval for all spacer installations
• Easy and quick assembly
• For insulation up to 220 mm

Processing & Assembly
• Drill through the thermal insulation (Ø 30 mm)
• Measure the thermal insulation
• Create a drill hole in the building material and remove the plaster layer if necessary
• Clean the drill hole
• Shorten the threaded rods if necessary (Length = drill hole depth + insulation layer) and screw on the Iso Spacer
• In hollow blocks, only use a sieve sleeve. Insert it completely into the drill hole
• Fill the drill hole in the substrate 2/3 full or completely with composite mortar
• Insert the threaded rod with the pre-mounted Iso Spacer into the drill hole with a slight twisting motion
• Allow the composite mortar to cure
• Seal the gap with silicone
• Mount the attachment component.