Stiebel Eltron FTM 200/4 Set Plus

Stiebel Eltron Floor Heating FTM 200/4 Set Plus

Manufacturer: Stiebel Eltron
Description: Floor heating for 4 sqm, 800W/230V
Type: FTM 200/4 Set Plus
Design: Heating cable
With carrier mat: yes
Fixation of heating conductor: sewn
Self-adhesive: yes
Connection voltage: 230 V
Connection power: 800 W
Power: 200 W/m²
Heating conductor load: 10 W/m
Resistance: 61 Ohm
Number of cold conductors: 1
Length of cold conductors: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 4 m²
Length: 13400 mm
Width: 300 mm
Thickness: 3 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes

The set consists of a thin-bed heating mat, specifically designed for thicker ceramic floor coverings, along with the corresponding controller and installation materials. The thin-bed heating mat is used for floor heating in new constructions and renovations. It is installed directly under the floor covering and quickly provides a pleasantly warm floor surface, regardless of the existing heating system. The heating mat is suitable as an additional or supplementary heating solution.

Comfort features: Thanks to its low build height, the heating mat is installed directly in the tile adhesive under ceramic coverings. The narrower installation width is particularly well-suited for small, awkward floor plans. In combination with a water-based underfloor heating system, the comfort of a warm floor can also be enjoyed outside the heating season. The heating conductor is completely sewn onto the self-adhesive carrier mat, making it easy and quick to lay on the floor.

Installation: The mat can be installed in the bathroom in conjunction with a residual current device. By cutting the carrier fabric, it can be easily adapted to individual space conditions.