Stiebel Eltron FTM 200/1.5 Set Plus

Stiebel Eltron Floor Heating FTM 200/1.5 Set Plus

Manufacturer: Stiebel Eltron
Description: Floor heating 1.5 sqm, 300 W/230 V
Type: FTM 200/1.5 Set Plus
Design: Heating cable
With carrier mat: yes
Fixation of heating conductor: sewn
Self-adhesive: yes
Connection voltage: 230 V
Connection power: 300 W
Power: 200 W/m²
Heating conductor load: 10 W/m
Resistance: 173 Ohm
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable as outdoor heating: no
Area: 1.5 m²
Length: 5000 mm
Width: 300 mm
Thickness: 3 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes

The set consists of a thin-bed heating mat, specifically designed for thicker ceramic floor coverings, along with the corresponding controller and installation materials. The thin-bed heating mat is used for floor heating in new buildings and during renovations. It is installed directly under the floor covering and quickly provides a pleasantly warm floor surface, regardless of the existing heating system. The heating mat is suitable as an additional or supplementary heating solution.

Comfort features: Due to its low installation height, the heating mat is installed directly in the tile adhesive under ceramic coverings. The narrower installation width is particularly suitable for small, angled floor plans. In combination with a water-based underfloor heating system, the comfort of a warm floor can also be enjoyed outside the heating season. The heating conductor is completely sewn onto the self-adhesive carrier mat, making it easy and quick to lay on the floor.

Installation: The mat can be installed in the bathroom in conjunction with a residual current device. By cutting the carrier fabric, it can be easily adapted to individual spatial conditions. EAN: 4017212057179.