Schneider Electric SCHNEIDER ELECT 21105

Schneider Electric motor-protective circuit-breaker 21105

Manufacturer: Schneider Electric
Designation: Motor-protective circuit-breaker 1.60A 3p P25M
Type: 21105
Installation depth: 44 mm
Tripping characteristic: K
Number of poles (total): 3
Number of fused poles: 3
Rated current: 1.6 A
Rated voltage: 400 V
Rated insulation voltage Ui: 690 V
Rated impulse withstand voltage Uimp: 6 kV
Voltage type: AC
Rated breaking capacity Icu to IEC 60947-2 at 230 V: 100 kA
Rated breaking capacity Icu to IEC 60947-2 at 400 V: 100 kA
Frequency: 50-60 Hz
Flush mounting: No
Neutral conductor connected: No
Overvoltage category: 3
Pollution degree: 3
Additional devices possible: Yes
Width in units: 2.5
Protection class (IP): IP20
Ambient temperature during operation: -20 to 60 °C
Connectable conductor cross-section multi-stranded: 1 to 6 mm²
Connectable conductor cross-section solid: 1 to 6 mm²
Explosion-proof: No

Further details: Acti 9 C120N miniature circuit-breaker, 10kA (IEC/EN 60898-1), 10kA (IEC/EN 60947-2). 2-pole, rated current 100A, B characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 500V AC. Protects circuits against short-circuit currents and overload currents. IP20 terminals. Fully open contacts are indicated by the OFF marking on the switching toggle, ensuring safety for employees working on the downstream part of the system. Feed from above and below. Snap action for low-wear switching of the contacts. Tripping unit technology - thermomagnetic. Can be combined with the Vigi RCD block for C120. Additional add-on auxiliary modules (optional) include display of switching position, fault tripping, shunt release, undervoltage release, and overvoltage release. Colour RAL 9003. The C120N miniature circuit-breaker complies with the following standards: IEC/EN 60898-1 and IEC/EN 60947-2. This series is also VDE certified. EAN: 3303430211051.