Schneider Electric Reflex LSwitch

Schneider Electric Circuit Breaker A9C62225

Manufacturer: Schneider Electric
Designation: Circuit Breaker 25A 2P C TI24
Type: A9C62225
Tripping Characteristic: C
Number of Poles: 2
Rated Current: 25 A
Rated Voltage: 415 V
Rated Short-Circuit Breaking Capacity according to IEC 60947-2: 10 kA
Voltage Type: AC
Frequency: 50-60 Hz
Switchable Neutral Conductor: no
Overvoltage Category: 4
Pollution Degree: 3
Width in Modular Units: 4.5
Installation Depth: 44.5 mm
Factory-Installed Additional Devices: Remote Control
Rated Switching Current of Additional Device: 1 A
Rated Voltage of Additional Device: 230 V
Control Voltage Type of Additional Device: AC
Protection Class (IP): IP20
Size (according to DIN 43880): 3

The remotely switchable circuit breaker Acti 9 Reflex iC60N has a breaking capacity of 20 kA at 220-240 V AC and 10 kA at 380-415 V AC. It is 2-pole, has a rated current of 25 A, a C characteristic, and a Ti24 interface. The insulation voltage (Ui) is 500 V.

Remote switching is performed using pulse and/or continuous signals according to one of the three adjustable operating modes set by the user. The switch protects circuits against short-circuit and overload currents and disconnects circuits. With the Ti24 connection option, direct connection to a PLC or decentralized I/O is possible.

The bistable switching mechanism requires no holding power. A green indicator on the switch guarantees that the contacts are open, ensuring safe operation on the outgoing side. The jump switching feature allows for low-wear switching of the contacts. An indicator light shows the operating status.

Control is achieved through three adjustable operating modes using the push button on the device front. Protection class IP20. To control the inputs Y1 and Y2 with 24/48 V AC/DC, the coupling relay iMDU can be used. Color tone RAL 9003. The remotely switchable circuit breaker Reflex iC60N meets the standards IEC/EN 60947-2.