Sanpro Rubber slab bearing / terrace bearing with joint cross 4/18 mm, quantity 50 pieces

For easy laying of stone, natural stone, and concrete slabs with a defined and even joint.

Professional quality made in Germany.

Diameter: 120 mm, support height: 10 mm.

Joint thickness: 4 mm, joint height: 18 mm.

Simple, cost-effective installation, as corner and edge pieces can simply be cut out.

Large contact surface ensures high pressure stability and prevents the tiles from tilting.

Noise-insulating and good water drainage thanks to the studded underside.

Our levelling discs can be used to compensate for height differences.

High-quality, flexible black rubber material resistant to weathering and ageing.

No frost damage due to flexible separation of the discs from the subfloor.

Environmentally friendly as 100% recyclable.

We recommend laying a layer of raw glass fleece (minimum 200 g/m2) on top of existing waterproofing.

Ideal for laying terrace slabs, for example on balconies, terraces, pavements, flat roofs, and walk-on garages.

The slab supports/stilt supports can also be laid on already laid terrace slabs/tiles.

With a 1 cm construction height, studded underside, and sufficient joint width, there is virtually no puddle formation thanks to ideal water drainage.

The modern, cost-effective, durable, and time-saving professional alternative to laying on mortar bags.

High load-bearing capacity of up to 200 kg per quarter segment, equating to 800 kg per terrace bearing.

The joint bars can be cut flush with a sharp knife if slab supports are required for a centre underlay.

Selection criteria:
Quantity: 50 pieces

Technical Data:
Weight: 5.4 kg.