Sanlight M-Dimmer for EVO series

Sanlight EVO Series Magnet Dimmer

The magnet dimmer is designed for a Sanlight EVO lamp. The blue dimmer must be plugged into the blue socket of the fixture. The M-Dimmer connection is color-coded. Connect the M-Dimmer (blue socket) to the blue 3-pin socket of the LED lamp.

With the magnetic clip, two different functions of the M-Dimmer can be set. To do this, hold the respective side of the clip approximately in the middle against the dimmer.

Technical specifications:

• Dimmer temperature range: 0 - 70 °C
• Voltage: +12V DC (via LED lamp)
• Max. current: 20 mA
• Never connect to 230V AC

Dimming settings (white side towards the dimmer):

• 3 LEDs lit: 100%
• 2 LEDs lit: 80%
• 1 LED lit: 60%
• No LED lit: 40%

Fade In active (black side towards the dimmer):
When the lamp is turned on, the power gradually increases from 10% to the set dimming level over approximately 3 to 5 minutes.

• Orange LED blinking: Fade In activated, power is gradually increasing
• Orange LED on: Fade In switched on, but not active
• Orange LED off: Sunrise simulation deactivated

Dimmer dimensions: 10.5 x 8 x 4 cm

Only suitable for Sanlight EVO Series! The dimmer is exclusively designed for LED lamps of the EVO series from Sanlight. Never connect to fixtures with Daisy-Chain output or to other cables/distributors!.