Resinence Color

Resinence Art Resin Coatings - for sustainable decorating and renovating. Resinence Color is an odorless, two-component water-based epoxy resin. With it, you can renovate old tiles, walls, wooden floors, laminate, natural stone, bathtubs, showers, enamel or stainless steel sinks, metal, and even entire furniture pieces indoors without prior priming. The product is also suitable for use on floors and in wet areas. For heavily used or water-exposed surfaces, seal the color with Résinence products in matte, satin, or glossy finishes.

Application instructions: Preparation - The surface must be dust-free and thoroughly cleaned. If necessary, the joints between the tiles should be brushed out. Then, the surface must be degreased with a dry grease remover type acetone.

Step 1 - I paint:
1. Apply Résinence Color directly onto the clean and dry surface using a foam roller without priming.
2. Allow to dry.
3. Some surfaces may require a second coat. Wait 6 hours between coats. Applicable on many surfaces without priming. Ideal for renovation and design in indoor spaces - floors, walls, countertops, sanitary facilities, and furniture.

Step 2 - I seal: Use Résinence Sealer to protect the surface and make it waterproof. You can get Résinence Sealer in matte, satin, glossy, and lacquer effect finishes. After sealing, the surface is guaranteed to be waterproof and permanently protected. Each can contains detailed usage instructions.