CHF20.– was CHF21.70
Shelly Plus 2PM
Shutter actuator, Switch actuator
Questions about Shelly Plus 2PM
What would you like to know?
0 questions and answers
Helpful answer
Try clicking on the non-responsive Shelly in the app, then at the very bottom on the cogwheel (settings) and again at the very bottom "Device Information". This will show you your Shelly's last IP address (e.g. 192.168.1.101). If you click on it, it will open your browser and try to access the Shelly directly. If a page opens, you get the minimal, cryptic interface of the Shelly in question, but you can do almost anything. If the page doesn't open, you'll have to do a Factory Reset (remove and restore power and within a minute press one or other of the buttons 5 times).
Good luck!
Sorry, we don't have any information on this.
Galaxus
1 week ago
Yes, that’s possible. The Shelly Plus 2PM can be linked to Alexa using the ‘Shelly Cloud’ Alexa skill and then controlled by voice.
It is important that the device is on the same Wi-Fi network as the one used to set up the Shelly Smart Control app, and that the Shelly Cloud or the Alexa skill is activated and linked.
For roller shutter functions, the integration may vary depending on the desired control; however, the basic Alexa connection is possible.
Automatically generated from the .
Helpful answer
Yes runs flawlessly hey google open / close roller shutter does exactly what it should do
Shelly 2PM doesn't support tilt control, you need a Shelly 2PM Gen3 for it.
With the 2PM Gen3 Home Assistant has full control over the Lamellenstoren including tilt functionality. I have different automations set up that control tilt and position.
About your second question. I never tried connecting more than one blind to one Shelly, so i don't know if it works.
Helpful answer
The Shelly 2pm has 2 relays. As if each of the two lamps has its own supply and a neutral behind it, then that works.
The 2pm has no dimming function and a fluorescent tube should also work with the relay.
(it might be time to replace the fluorescent tube with an LED tube of the same design ;-)
According to our information, this is not supported.
Helpful answer
If it works correctly with the shelly app and the switch, in my opinion it is the configuration with Homee that needs to be changed if possible. I use it with Alexa, Google, Home Assistant and Apple Home pod and it works perfectly with all platforms.
Helpful answer
There is nothing more suitable. You have to try with the application to change the key input configuration.
Das geht mit dem Shelly Dimmer 2: Shelly Dimmer 2
No, Shelly does not offer Homekit support.
And the GitHub project that makes it possible has no support for the new Shellys.
https://github.com/mongoose-o...
I recommend HomeAssistant
https://www.home-assistant.io/
No, otherwise the Schelly would be too big because it would need too many connections. And if the Shelley is too big, it won't fit behind the switch.
Yes, the shelly button can be set up, but you need at least a pc with wifi or an ipad/mobile and you have to "programme" it...
Helpful answer
The ability to control a motorised window works because you can control roller shutters, and weigh motorised blinds. As far as the world of Zigbee buttons is concerned, this can be done via voice assistant interfaces or via the Home assistant platform because the Shelly application does not have a Zegbee protocol, but has buttons with Wi-Fi equipment such as the Shelly plus i4 or Shelly i4 DC.
Helpful answer
The Shellies can all be controlled via WLAN. This can be done via the network or via a connected switch/button. In this way, the 220V to the consumer is cut or forwarded via a relay. It doesn't matter what is connected at the back, it is switched.
Helpful answer
You can control a roller shutter with a Shelly 2pm (once up and once down).
This means that 2 roller shutters/blinds also require 2 Shelly 2pm.
23 of 23 questions