Questions about Bluetti AC200 Max

Galaxus

1 month ago

Helpful answer

You can charge the Bluetti AC200 Max with a Goal Zero Nomad 100 solar panel, but there are some limitations. The Nomad 100 has an open voltage of 14-22V, which is below the recommended minimum voltage of 35V for many Bluetti models. To reach the minimum voltage, you need to connect at least two Nomad 100 panels in series. For the connection, you may need a cable adapter to make the panels compatible with the Bluetti device. It is advisable to check the specific requirements of the Bluetti AC200 Max as it supports a wider voltage bandwidth than the AC200P.

Automatically generated from the .

8 months ago

The weight in the description is Not correct! According to Bluettipower official website the weight of Bluetti AC200Max is 28.3 kg and not 35 kg.

Virginia Parrotta

8 months ago

Thank you for your comment. The specifications have been adjusted.

freywillig

11 months ago

Can the DE version with Schuko connections also be ordered in Switzerland? Or is this prohibited by law? Is it at least possible to fit power adapters so that all 4 connections can still be used in Switzerland? For example: https://www.digitec.ch/de/s1/product/max-hauri-adapter-fuer-powerbanks-stromadapter-21408174

tahya2008

11 months ago

Helpful answer

Hi, I received mine with "German" plugs. Only one is accessible and the other 3 have a plug that is very easy to remove. Although "forbidden" in Switzerland (for what reason?) it works very well with several appliances that are not too greedy plugged in. Otherwise the Swiss 2-pin plugs work fine.

schmidt.reto

1 year ago

Where can I buy plugs / cables, e.g. for the 12V/30A output (12V RV 2 Pin Aviation)? Preferably with a piece of cable to connect directly to the power distributor of the motorhome.

ArbenG706

2 years ago

How long is the warranty on the Bluetti AC200 Max?

2 years ago

Hello, It's under warranty (24 mo bring in). LG

2 years ago

Does anyone know the specific Swiss electrical regulation that limits this unit to just one of the AC outlets. Any info or pointers would be much appreciated. Thanks.

2 years ago

With which foldable solar panels approx. 300 to 450 watts can be connected here? Thank you for experiences :)

2 years ago

Is the unit noisy when a unit with approx. 100 W is connected?

4 answers

2 years ago

According to the specification, the Power Szation has Schuko connections. Is this legitimate for use in Switzerland, or is this just a typo?

chweber01

2 years ago

Do any of you have the Victron panels on the Bluetti? These should fit, but I can't quite work out the max. amps for charging, as the Victron panel doesn't say anything about this. https://www.digitec.ch/de/s1/product/victron-energy-solarmodul-360-w-solarpanel-15459863?supplier=406802

Rene Bieri

2 years ago

Dear Digitec. Why don't you have the Bluetti PV200 solar panel in your range? Which 200Watt third-party panel fits it?

David Raemy

2 years ago

Helpful answer

In this case, please contact our customer service directly so that a possible admission can be checked. :) helpcenter.digitec.ch/hc/en/requests/new

Helvede

2 years ago

the Goalzero Nomad 100 solar panel is compatible with this power station!

BernardJ448

2 years ago

i don't know. i have 2 victron solar panels, 305 W each. monocrystalline module 1658 x 1002 x 35 mm. i am satisfied.

antonyrobe0

2 years ago

Was ist der Unterschied zu https://www.digitec.ch/de/s1/product/bluetti-ac200max-2048-wh-power-station-20932939?

Chantal Schneider

2 years ago

The products do not differ technically. One of them was offered by a third-party supplier who is currently unable to deliver.

dg88

2 years ago

is this wrong image or wrong title? because image doesn't match the title (poweroak or bluetti)?

atabascael

2 years ago

poweroak is the parent company and bluetti is one of their brands.

2 years ago

I have never had a Power station before. What type of output ports do I get, apart from the USB ones? (not specified in the product description). Also, what does it mean that solar panel can charge it, if you don't specify the type of connectors needed for it and the min and max input? Please, add these info.