Pure Factory Extraction Bags 3-piece Outdoor

The outdoor set from The Pure Factory consists of three bags with sieve thicknesses of 185μ, 70μ, and 38μ, with a diameter of approximately 30 cm.

These bags are ideal for processing plant residues with smaller resin glands.

While the coarser bag retains the plant residues, the finer ones filter out the resin crystals that get stuck in the sieve.

Extraction with the extraction bags is a cost-effective and simple way of producing resinous extracts without a great deal of effort.

Always make sure that the coarsest bag is at the top and the finest at the bottom.

Application:

With a resinator:
Fix the extraction bags in a kettle.

Place the fine-meshed bag in the kettle first.

Place the coarse-meshed bag in the fine-meshed bag.

Wash out the plant residues in the resinator for 15 minutes.

Drain the water into the prepared container.

First, remove the coarse bag and squeeze out the water well. Place this in a separate kettle.

Now remove the fine bag and squeeze out the water well.

Remove the remaining extract and spread it on a clean, dry surface, as airy as possible.

Leave the resin to dry for at least 48 hours.

Flavor always comes with time. You can also use the plant residue from the coarse sieve for further use; however, this has a lower purity.

Without a resinator:
Prepare the bags as described above.

Fill a separate kettle approximately halfway with cold water.

Now pour about 2 kilos of crushed ice into the water. Add the plant remains to the water.

Stir the water well several times. You can also use a blender, as long as it does not puree the plant remains.

Now pour the water into the prepared bag kettle and continue as described above.