Pferd Fan grinder

Zirconium corundum for the machining of stainless steels and high-temperature resistant alloys. High grinding performance, no clogging of the flaps. Ideal for coarse grinding tasks with high material removal rates and cool grinding. Grinding-active additives in the coating achieve significantly higher removal performance, prevent clogging, and ensure cooler grinding. Shaft diameter 6 mm.

Further technical properties:

• Shaft diameter: 6 mm
• Drive type: Straight grinder, flexible shaft drive
• Application recommendation: Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure will make the surface slightly coarser. The softer the material being processed, the coarser the surface. An increase in removal performance should be achieved through a coarser grit rather than increasing the contact pressure to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed, as well as adding grinding oil, reduces tool wear and thermal stress on the workpiece. Use suitable grinding oil for the material to significantly increase the tool's service life and grinding performance. For best performance, use at a recommended cutting speed of 15–20 m/s. This achieves an ideal compromise between removal performance, surface quality, thermal stress on the workpiece, and tool wear.

Machinable materials: Titanium, copper, steels up to 1,200 N/mm² (54 HRC, hardened, tempered steels).