Pepperl & Fuchs Through-beam photoelectric sensor

Pepperl+Fuchs Factory Single Beam Light Barrier 281010

Manufacturer: Pepperl+Fuchs Factory
Designation: Single Beam Light Barrier
Type: 281010

Contents of the single beam system: Transmitter and receiver
Pre-failure notification: no
With time function: no
Max. switching distance: 15000 mm
With reflector: no

Analog output 0 V ... 10 V: no
Analog output 0 mA ... 20 mA: no
Analog output 4 mA ... 20 mA: no
Analog output -10 V ... +10 V: no

With communication interface Analog: no
With communication interface AS-Interface: no
With communication interface CANOpen: no
With communication interface DeviceNet: no
With communication interface Ethernet: no
With communication interface INTERBUS: no
With communication interface PROFIBUS: no
With communication interface RS-232: no
With communication interface RS-422: no
With communication interface RS-485: no
With communication interface SSD: no
With communication interface SSI: no

Type of electrical connection: M8 connector
Type of switching output: PNP/NPN
Housing design: Rectangular
Width of the sensor: 13.9 mm
Height of the sensor: 41.4 mm
Length of the sensor: 18.3 mm
Material of the optical surface: Plastic
Material of the housing: Plastic
Voltage type: DC
Light type: Red light unpolarized

Further details:
Operating range: 0 ... 12 m
Light source: LED
Light type: red, flashing light
Signal output: 2 complementary outputs, short-circuit proof, reverse polarity protected, surge protection
Interface type: IO-Link (via C/Q = Pin 4)
Circuit type: The circuit type of the sensor is switchable. The default state is:
C/Q - Pin 4: NPN normally closed / dark switching, PNP normally open / light switching
IO-Link / Q - Pin 2: NPN normally open / light switching, PNP normally closed / dark switching
Connection: Device connector M8 x 1, 4-pin
Operating voltage: 10 ... 30 V DC
Ambient temperature: -40 ... 60 °C (-40 ... 140 °F)
EAN: 4050143047758.