Niedax Hanging handle 500mm HU5050/500 **

Niedax Hanging Handle HU 5050/500
Manufacturer: Niedax
Designation: Hanging Handle
Type: HU 5050/500
Length: 505 mm
Profile width: 50 mm
Profile height: 50 mm
Design: U-profile
Load capacity: 4 kN
Suitable for functional maintenance: Yes
Material: Steel
Stainless steel, pickled: No
Material grade: Other
Surface protection: Hot-dip galvanised
Weight: 1.65968 kg

Niedax Hanging Handle HU 5050/500 further details:
Hanging handle with a three-sided continuously perforated U-profile and a welded-on top plate, designed for outriggers for one-, two-, and three-sided installation. This design prevents deformation of the suspended support profile when installing outriggers. For static reasons, the suspended support spacer profile HDS 50.50 F with a hexagon head screw should be considered. If the bracket is attached to the suspended support profile on one side, it is preferable to align the closed side of the bracket with the profile web of the suspended support. For static reasons and to enable the protective cap to be fitted without issues, the bracket must be mounted at a distance of 50 mm (lower edge of bracket to end of hanger post) above the end of the hanger post.

For use in functional maintenance or for suspended ceilings with fire protection requirements, please observe additional regulations. VDE certified.

For outriggers: KTAL... KTAM... KTA...
For cantilevers: KTAS 100 - 400 (functional integrity/KFO)
For cantilevers: KTA 100 - 600 (functional integrity/MLAR)

Dimensions (approx.):
Top plate L x W x d: 140 x 80 x 5 mm
Fixing holes: 13 x 20 mm
Central distance: 100 mm
U-profile: 50 x 50 x 50 mm
Material thickness t: 2.5 mm
Three-sided profile perforation, single row: 12 x 30 mm
Central distance: 50 mm
Total length L: 505 mm
Material: Steel, hot-dip galvanised according to DIN EN ISO 1461
EAN: 4013339858781.