Kerbl Frost protection heating cable

Ideal frost protection cable down to -45 °C. Thermostat for automatic switching on and off. Prevents frost-prone objects from freezing. Measures and switches on automatically at 3 °C. Not suitable for heating pipes. Do not insulate the thermostat with additional insulation. Protect the area that animals can nibble on with a bite guard. Prevents water pipes from freezing. The thermostat in the heating cable switches the cable on automatically. What must be observed with 230 V heating cables: Always attach the heating cable to the underside of the pipe. The water pipe must be earthed. The 230 V heating cables must be plugged in and connected to a power supply with a circuit breaker (RCD 30 mA). The heating cables must not be shortened and should therefore be ordered in the correct length. Remaining lengths can be wound around the pipe in turns (note that a minimum distance of 15 mm between turns must be maintained). Do not kink the heating cable and observe the maximum bending radius of approx. 50 mm. The heating cables can be attached to the pipe with insulating tape or aluminium tape. When used on plastic pipes, the pipe must be wrapped with aluminium tape before the heating cable is laid. The pipe and the heating cable should be insulated with a maximum of 13 mm of insulation. The thermostat of the heating cable should be installed at the coldest position of the pipework. The thermostat must only be moderately insulated. Do not use 230 V heating cables in the browsing area of animals. Installation must be carried out by a qualified specialist in accordance with VDE0100.