JUNG Emergency call set

Consists of a pull switch, call module, reset button, and power supply (screw mounting, without mounting claws) complete with a single frame. The JUNG emergency call system is designed for emergency calls in accessible toilet facilities and meets the safety technical requirements according to DIN VDE 0834. The emergency call system is modular in design. The following four components are available together as a complete emergency call set:

Pull switch: An emergency call can be triggered in the bathroom/toilet via an easily accessible pull cord. The pull switch can also be installed in the middle of the room on the ceiling to be easily reachable for those in need of assistance. A successful call activation is indicated by a red reassurance lamp on the switch.

Call module: The call module can be installed outside next to the toilet door or hallway door. An activated emergency call is visually signaled here by a red LED and acoustically by a buzzer (90 dB(A)). Both signals can be switched from steady light/steady tone to flashing light/pulsing tone.

Reset button: In the same room where the pull switch is located, the reset button is installed next to the door. The assisting personnel can use it to cancel the triggered call.

Power supply: For powering the emergency call system with DC 24 V. The service room unit, service room terminal, and call button are available separately. The service room unit can be installed, for example, in a staff or reception area. A green button indicates presence, while a yellow button suppresses the acoustic emergency call signal of the call module for 20 seconds.

The components of the JUNG emergency call system are complemented with frames from the AS / A, CD, or LS series, allowing for a uniform design throughout the building. The complete emergency call set already includes the frames. To expand a system, the components are also available individually.