Hettich Cabinet hanger SAH 305 Zinc die-cast blank, for drilling in

Description: • For pressing into a hole ø 30 x 11.5 mm • Back wall minimum 16 mm thick • Load capacity 15 kg / piece according to EN 15939 in the test frame A • Lateral alignment ± 8 mm • Suspension with hanging hook ø 6 x 50 mm • Zinc die-cast zinc-plated Notes on the load capacity of cabinet hangers and accessories When it comes to the load capacity of cabinet hangers and accessories, the following principles must be observed: • Both the furniture construction and the material and manufacturing quality of the furniture are beyond our control. • We also have no influence on the nature of the wall materials. • The hanging hooks we offer in conjunction with dowels are intended for use in solid bricks, aerated concrete blocks, concrete, or clinker bricks. A hole with a diameter of 8 mm must be drilled into the solid stone material, into which the plastic dowel is flush-mounted. The minimum hook screw-in depth corresponds to the hook length minus 10 mm. • For fastening to other wall materials, commercially available special fastening elements must be used. • Dowels and screws must be coordinated with each other. Dowels screws must not be replaced by standard chipboard screws. • Mounting of hanging rails: - with 2 special screws ø 5.5 x 50 mm in the area of each cabinet hanger - for a body width of 900 mm or more, an additional special screw ø 5.5 x 50 mm must be placed centrally behind each body (Type A, Type B, and Type H). • Additions such as end shelves are not permitted without separate cabinet hanging. • It is the responsibility of the furniture manufacturer/retailer to ensure that the furniture placed on the market complies with the requirements of EN 14749.