Hager Switching/shutter output

KNX switch/shutter output, 2/1-fold + 2 inputs, flush-mounted, 6A. Flush-mounted switching actuator with integrated bus coupler for controlling 2 socket or lighting outputs or 1 roller shutter/blind. Additionally, 2 binary inputs are available. For the lighting outputs, options include On/Off, time control, safety off, forced control, lock, logic, preset, delay function, or 64 scenes. With toggle function for time or duration. The shutter function allows for commands to move Up/Down/Stop and adjust the slat angle. Percentage control of the shutter to move to a predefined position. The sun protection function can control brightness per room in conjunction with an external sensor. With alarm function to control the shutter to a defined position. Safety descent as long as the button is pressed. 64 scene functions per channel. Logic block to control the output based on the result of a logical combination. Preset, lock function, forced control. With 2 independent binary inputs for potential-free contacts, binary input functions: Toggle, switch, timer, roller shutter/blind, dimming, heating, forced control, scene, alarm, disable automation, load shedding, and window contact. The device converts bus information into corresponding commands. The outputs are switched via the system line from their assigned inputs or the integrated inputs. Manual operation as well as a switching status display via LED and operating hour counter per output. The device can be read out with a diagnostic tool. With programming button and red programming LED, bus connection, and binary inputs configured with cable and bus terminal or isolated.