Hager Electric box

Meter cabinet, univers Z, 1400 x 800 x 205 mm, protection class II, 324 space units. Cabinet housing according to DIN VDE 0603/1, dimensional standard DIN 43 870 for surface-mounted, flush-mounted, or partially recessed installation. Designed for the construction of a meter distribution system up to 355 A, rated voltage 230/400 V 50 Hz. Protection class IP31 (IP44/IP54 according to DIN VDE 0470/1), protection class II with protective insulation, protection class IP3X behind the door. Consists of a cabinet with a door made of powder-coated, baked-on, sturdy profiled 1 mm thick steel sheet. Interior lining completely made of plastic. Cable entries at the top and bottom through built-in plastic flange plates, rear pre-formed in the plastic part, and side-mounted plastic flange plates in the area of the NAR (suitable for busbar entry), the RfZ (only at a height of 1100 mm), and the AAR. Door flush with the front with internal adjustable hinges, optionally hinged on the right or left with a 110° opening angle. Door lock with a latch, from a width of 800 mm and for all cabinets from a height of 1250 mm with a rod lock with three-point locking. Door lock interchangeable with other locking systems. Cabinets can be flanged side by side and on top of each other. Cabinet size from 1 to 5 fields with 72 to 540 space units (PLE). Note: Always use a connection set (accessory) for a cabinet-to-cabinet connection. In the AAR area, the plastic flange plate can be removed, and optionally a SCHUKO socket or a CEE socket can be installed.