Gira Motion detector top

System 3000 Motion Sensor Attachment 1.10 m Comfort BT in glossy cream white. Automatically switches lighting based on heat movement and ambient brightness. Operates with System 3000 switching, dimming, or secondary unit 3-wire. Extends the detection range in combination with the 3-wire secondary unit. When connecting a System 3000 secondary unit with a control attachment or mechanical switch to the main unit, the lighting can be turned on or dimmed for the duration of the run-on time. Manual switching between automatic, permanent on, and permanent off is possible on the device.

With System 3000 switching unit: short-term operation. With System 3000 dimming unit: turns on with the last set brightness or saved switch-on brightness. The switch-on brightness can only be permanently saved via the System 3000 secondary unit with control attachment. Basic light function and night light function.

Functions with Gira System 3000 App: Set brightness threshold, sensitivity of the two sensors can be individually adjusted (0, 25, 50, 75, 100 %), set run-on time, forced functions: automatic operation, permanent on/off, time-limited on/off for 0.5 to 5 hours, presence simulation, switch-off pre-warning, day operation, walk test, timer function, and alarm function.

The detection field is horizontally aligned and may not have a limit when used outdoors. Therefore, pay attention to the suitability of the mounting location in outdoor areas or use the motion sensor attachment at 2.20 m. A snap-on cover to restrict the detection range is included in the delivery.