Etherma 253-GUSN-75-2510

Etherma Outdoor Heating 253-GUSN-75-2510

Manufacturer: Etherma
Description: Outdoor heating 18.86 sqm 4714 W 400 V
Type: 253-GUSN-75-2510
Design: other
With carrier mat: yes
Heating conductor fixation: glued
Self-adhesive: no
Connection voltage: 400 V
Connection power: 4714 W
Power: 250 W/m²
Heating conductor load: 25 W/m
Resistance: 34 Ohm
Number of cold leads: 1
Length of cold leads: 10000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: yes
Suitable as roof heating: no
Area: 18.86 m²
Length: 25100 mm
Width: 750 mm
Thickness: 7 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

The outdoor heating system for installation in cast asphalt GSN is designed to keep parking garage entrance ramps, emergency access routes, entrance areas, etc., free from snow and ice. The GSN heating mat consists of a glass fiber armored mesh onto which a dipole heating conductor is sewn. The permissible application temperature is 240 °C for 10 minutes. The glass fiber armored mesh prevents the heating conductor from floating up. The sewing technology with an aramid thread guarantees 100% reliable installation and stability of the heating mat. The mat does not need to be fixed to the substrate. The optimal asphalt thickness is 2x2 cm and must be applied in two work steps. The heating conductor is resistant to spherical acids and alkalis.

Tip: We produce your connection cable to measure.
Nominal temperature: 105 °C
System structure: according to EN60335
Heating conductor certification: FIMKO, CE compliant
Protection class: IP X7
Outer diameter: 7 mm
Connection cable: 10 m, 3x1.5(2.5) mm²
Min. bending radius: 5 d
Min. installation temperature: -5 °C
Outer sheath temperature resistant: 240 °C/35 min
Protection measure: FI protection circuit 30 mA
EAN: 9120061398814.