Eltako Switch current impulse switching relay noiseless

Silent solid-state relay, not potential-free, 400 watts, with fall-back delay, switch-off pre-warning, and optional permanent light switch. Encrypted radio, bidirectional radio, and repeater function can be activated. The standby loss is only 0.8 watts. Suitable for built-in installation. Dimensions are 45 mm long, 45 mm wide, and 33 mm deep. Starting from manufacturing week 35/16, an automatic electronic over-temperature shutdown is integrated. For loads of less than 1 watt, a GLE must be connected in parallel with the load. In addition to the radio control input via an internal antenna, this radio actuator can also be locally controlled with a conventional 230V control switch that may be mounted in front of it. A glow lamp current is not permitted. Encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be activated. Any change in state as well as received central control telegrams are confirmed with a radio telegram. This radio telegram can be learned into other actuators, the GFVS software, and universal displays.

Scene control: With one of the four control signals from a button learned as a scene button with a double rocker, multiple FSR61s can be switched on or off as a scene. With the upper rotary switch in the LRN position, up to 35 radio buttons can be assigned, including one or more central control buttons. Additionally, radio window-door contacts with the function of normally closed or normally open when the window is open, radio outdoor brightness sensors, and radio motion detectors can be used. The LED accompanies the learning process according to the operating instructions and indicates radio control commands during operation by briefly flashing.