Eltako Staircase lighting timer

Eltako staircase light timer TLZ12-8

Manufacturer: Eltako
Designation: Staircase light timer
Type: TLZ12-8
Function: Electronic
Mounting type: Flush-mounted
Installation depth: 18 mm
Number of contacts as make contacts: 1
Control voltage: 230 V
Control voltage type: AC
Frequency of control voltage: 50 Hz
Rated switching current: 10 A
Release delay: 12 to 1 min
Pushbutton glow lamp current: 50 mA
Circuit type: 3- and 4-wire circuit
Switch-off prewarning: Without
Current surge function selectable: No
Post-switching: Post-switchable, continuous light, time extension
Supply voltage: 250 V
Voltage type of supply voltage: AC
Max. incandescent lamp load: 2000 W
Max. fluorescent lamp load: 1000 VA
Max. fluorescent lamp load (duo circuit): 1000 VA
Max. fluorescent lamp load (parallel compensated): 1000 VA
Fluorescent lamp load (parallel compensated): 500 VA
Max. switching capacity LED: 100 W

The Eltako staircase lighting timer TLZ12-8 features one NO contact that is not potential-free, rated for 16 A/250 V AC. It supports 230 V LED lamps and ESL up to 100 W, and incandescent lamps up to 2000 W, without switch-off pre-warning. The stand-by loss is only 0.7 watt. Time setting ranges from approximately 0.2 to 12 minutes. It includes a continuous light switch with a large rotary switch. Suitable for 3- and 4-wire circuits, it can be switched subsequently, with attic lighting for 4-wire circuits. The device automatically recognizes the circuit type and operates without switch-off pre-warning and contact switching in zero crossing. It has double connections for pushbutton and lamp, allowing for connections at either the top and bottom or only the bottom.