Eltako FKLD61

DC constant current source for LEDs up to 1000 mA or 30 watts. Standby loss is only 0.3 watts. Minimum brightness and dimming speed are adjustable. Features a children's room and snooze function. Additionally, it includes light scene control via PC or with wireless switches. Encrypted wireless, bidirectional wireless, and repeater function can be activated. Designed for installation. Measures 45 mm long, 45 mm wide, and 33 mm deep. The nominal output current can be set with a jumper on the circuit board: no connection: 350 mA, right-aligned (pins 2-3 connected): 700 mA, left-aligned (pins 1-2 connected): 1000 mA. Factory setting is 700 mA. The input voltage range is from 12 V DC to a maximum of 36 V DC. The input voltage must be higher than the sum of the LED voltage at the output for the current regulation to function. This regulation difference must be at least 6 volts. The total power output current x output voltage must not exceed 30 watts. A pulse-proof DC power supply is required, providing the necessary voltage and current for the LED lamp(s). Universal control voltage 8. 230 V AC, galvanically isolated from the supply and switching voltage. The set brightness level is saved when turned off (memory). In the event of a power failure, the switching position and brightness level are saved and can be turned on again when the supply voltage returns. Automatic electronic overload protection and over-temperature shutdown. Starting from manufacturing week 11/14, encrypted sensors can be learned. Bidirectional wireless and/or a repeater function can be activated. The upper lamp rotary switch can adjust the minimum brightness (fully dimmed). In the LRN position, up to 35 wireless switches can be assigned, including one or more central control switches. The lower dim speed rotary switch can set the dimming speed.