Eaton NZM1-XFI30R

Optional accessories for the NZM circuit breaker series offer a comprehensive portfolio of application possibilities for global use. Installation is flexible and straightforward thanks to modular functional groups. Notes: Not UL/CSA approved according to IEC/EN 60947-2. Suitable for use in three-phase and single-phase systems. Impulse current sensitive according to the sum current principle. For 3- and 4-pole NZM1(-4) circuit breakers and N1(-4) disconnect switches. Supply voltage Ue = 200 to 415 V 50/60 Hz. For I △n = 0.03 A: Delay time t v is always permanently set to 10 ms. Warning signal over 30% I △n via yellow LED. Tripping signal can be retrofitted with a maximum of 2 auxiliary contacts (HIAFI): S = M22-K01, Ö = M22-K10 are reset via the reset lever. When using the tripping switches in the RCD block, the NC contact functions as a NO contact and the NO contact as an NC contact. Double contact not permitted. Not to be used in combination with insulating housing or main switch kit for side wall mounting with mounting bracket. NZM1-XFI..R cannot be used in combination with the bottom cover NZM1-XUSA. NZM1-XFI..U not to be used in combination with shunt trip or undervoltage release, leading auxiliary contacts. The rated short-circuit breaking capacity is determined by the connected NZM1, NS1. If a disconnect switch N1 is used, it is determined by the fuse to be used. See technical data. Suitable for: NZM1, N(S)1.