Devi Thin bed heating mat DTIF 140F0449 150 W/sqm 3.0 sqm 0.5x6.0m self-adhesive

Devi Thin Bed Heating Mat 140F0449

Manufacturer: Devi
Description: Thin bed heating mat 150 W/m², 3 sqm
Type: 140F0449
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: yes
Connection power: 0-450 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as surface heating: no
Suitable as roof heating: no
Area: 3 m²
Length: 6000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

Additional details:
Thin bed heating mat with one connection lead and suitable sensor protection tube DN10 with red cap. The self-adhesive thin bed heating mat with one connection lead is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is eliminated. The heating cable with additional protective sheath for the use of RCD protection is applied to a plastic mesh. The length of the connection leads is 4.0 m. Cold conductor: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating output: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 3.0 m², 0.5 x 6.0 m.