Devi 140F1701

Devi Thin Bed Heating Mat Set 140F1701

Manufacturer: Devi
Description: Thin Bed Heating Mat Set 0.5 x 3.0
Type: 140F1701
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: glued
Self-adhesive: yes
Connection power: 0..225 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as surface heating: no
Suitable as roof heating: no
Area: 1.5 m²
Length: 3000 mm
Width: 500 mm
Thickness: 4 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: no

Additional details: Thin bed set with Opti clock thermostat, flexible sensor protection tube DN10, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection line is pre-assembled and designed specifically for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 4 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection lines is 2.3 m. Cold conductor: 1 x 2.3 m, 2 x 1.0 mm², Voltage: 230 V, Rated limit temperature: 90 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: lead-free PVC / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 4 mm, Protection class: IPX7, Approval: IEC 60335-2-96, Area: 1.0 m², 0.5 x 3.0 m.