Danfoss Heating mat

Devi heating mat for asphalt installation DEVIasphalt 300#0607

Manufacturer: Devi
Designation: Heating mat for asphalt installation
Area: 6.0 m²
Length: 8000 mm
Width: 750 mm
Thickness: 8 mm
Connected load: 1740 W
Output: 300 W/m²
Heating conductor load: 30 W/m
Number of cold conductors: 1
Length of cold conductors: 30000 mm
Suitable for damp rooms: Yes
Suitable as open area heating: Yes
Suitable as roof area heating: No
With carrier mat: Yes
Self-adhesive: No
With controller: No
With room thermostat: No
With floor temperature sensor: No

Ready-to-install heating mat with a connection cable, suitable for embedding in asphalt pavements. The heating cable fulfills the requirements of IEC 60800 and EN 62395. It features additional protective braiding for use with a residual current circuit breaker. Includes a factory-fitted watertight sleeve and a 30 m long PTC resistor.

Voltage: 400 V
Nominal limit temperature: 90°C
Installation temperature: 240°C for short periods
Deformation resistance: 2000 N
Tensile strength: 120 N
Heating conductor insulation: FEP
PTC resistor: 1 x 30 m 2.5 mm²
Specific heat output: 300 W/m²
Resistance tolerance: +10% / -5%
Minimum installation temperature: 5°C
Smallest bending radius: 5 x dA
Protection class: IP X7
Area: 6.0 m²
Power: 1750 W
EAN: 5703466229118.