CanFan Satellite 4A Climate Control

Fan control This 6-stage transformer can be adjusted manually or connected to a Can EC-Fan controller, which then regulates the transformer according to temperature and humidity. The transformer controls all single-stage fans up to 4 amps / 880 watts. The output is divided for supply and exhaust air. The output for the exhaust air always runs one stage above the supply air to ensure a negative pressure in the room. Technical data of the Can-Fan Satellite step transformer Number of steps: 6 (Auto & Standby &1-6 speed setting) Controllable fans: Supply air & extract air Controllable fans: Maximum 2 Fuse: Yes Speed setting: Manual or Auto-EC in conjunction with Can Fan LCD EC controller Fan type: AC What can a step transformer do? A step transformer regulates fans to the desired speed by means of a copper coil. The 6 steps make it possible to regulate the fans "hum-free", so that the operating noise level is considerably reduced! Climate controllers with only one stage and one potentiometer (e.g. SMS COM Smart Controller) can start to "hum" at low speed settings. The Can-Fan Satellite 4A step transformer ensures quiet & reliable climate control. The sensor cable can be extended up to 50m. Can-Fan Satellite 4A step transformer unfolds its full potential in conjunction with the Can-Fan LCD EC Fan Controller. Both devices are connected to each other via a jack cable. This allows the following settings to be made: For day & night respectively: * Minimum and maximum speed * Minimum and maximum temperature * Minimum and maximum humidity * Hysteresis for temperature * Hysteresis for humidity * Light intensity for day & night * Regulation of negative pressure if the fans are used for supply air & exhaust air.