CanFan CAN LCD EC Controller

CAN EC controller min/max, day/night 3 seconds.

P-1 Calibration of the lowest possible speed. As not every EC fan has the same minimum speed, this can be set on the EC fan controller. Pay attention to the valve speed and set the minimum speed from off to 1%. The fan must now start rotating on its own; it must not stall or stop.

Here you can now set the speed to 1% of the minimum speed. Press and hold the button to change the value. Save the new value by pressing and holding the button to move to the next setting. Repeat the process for all other settings.

P-2 Backlight Select the backlight: Automatic, ON, or OFF (default is Auto).

P-3 Output signal 0-10V or PWM settings Select between 0-10V or PWM (pulse width modulation). (Default setting is 0-10V).

End

Turn the knob clockwise to "End." Press the knob to confirm. The AC/EC ventilation controller initializes with the new set values.

LCD display

• Graphic and digital display of the speed (RPM)
• Temperature display
• Humidity display

Technical details

• Dimension (LxHxD): 61 x 98 x 20 mm
• Weight: 2.5 kg
• Voltage: 12 VDC
• Current consumption: 35 mA
• Housing protection class: IP20

Scope of delivery

• 1 x EC fan controller
• 1 x current transformer
• 1 x temperature, humidity, and light sensor
• 2 x 4 m cable for connecting fans
• 1 x operating instructions.