Bernstein F1-ZSD Foot switch 5 A 1 pedal 1NO contact 2 NO contacts IP67 1 pc.

Suitable for high demands in industrial applications. Existing mounting holes provide the option to screw the foot switches to the ground. Each foot switch is equipped with four rubber feet to prevent slipping. The foot lever is made of thermoplastic. The consent foot switch offers two consent contacts and one signaling contact and is available both with and without latching. When the pedal is pressed to the point of actuation, the two release contacts close. When the pedal is released, the release contacts open again. If the pedal is fully pressed down, beyond the actuation point, the release contacts open in a forced disconnection manner. For the application of a consent device, standards such as DIN EN ISO 12100 and DIN EN 60204-1 must be observed. The signaling contact allows for dynamic position detection. Alternatively, static position detection can be realized using a PNP output. This makes it possible to determine the actuation position 1, which is the OFF state of the release contacts (actuator is not pressed), or position 3, which is the OFF state of the working contacts (actuator is fully pressed), and make it directly available to the control system. The approved consent foot switch is only available in the standard version without UN cover.