Belton Hammer effect spray

Weather-resistant and high-quality, this paint spray features a typical hammered look and can be used on a wide variety of materials. It is perfect for redesigning or touching up objects such as toolboxes, flower pots, railings, and more.

Product advantages:

• Nostalgic hammered effect
• Hammered surface structure
• High hiding power and fast drying
• Very good flow and easy application
• Very economical
• Weather-resistant, suitable for indoors and outdoors
• Ideal for letterboxes, stair railings, tool boxes, etc.

Binder base:
Nitro combination resins

Spray application:
With 2-3 cross coats: approximately 40-50 μm
Spray distance: 15-25 cm
Pre-mist the hammer finish lacquer in the desired color shade and then apply a full coat of approximately 40-50 μm.

Drying times:

• Dust-dry: after approximately 20 minutes
• Touch dry: after approximately 60 minutes
• Fully dry: after approximately 12 hours

Can be painted over:
With itself: at any time

Paint build-up:
Metal:
1. Belton basic rust protection primer (exterior)
2. Belton basic universal primer
3. Belton special hammer finish paint
Wood:
1. Belton basic wood primer
2. Belton special hammer blow effect
Plastics:
1. Belton basic plastic primer
2. Belton special hammer blow effect
Styrofoam:
1. Belton basic polystyrene primer
2. Belton special hammer blow effect

Note:
Please check plastic substrates for compatibility. All other substrates, such as stone, clay, ceramics, glass, rattan/bast, and cardboard/paper must be primed with the Belton universal primer. Do not spray on synthetic resin painted surfaces as the paint may lift. The surface to be painted must be clean, dry, and free of grease.