Alpina Farben Colour recipes Effect glaze metal effect silver 1 l

Alpina Color Recipes Metallic Effect Silver - 1 Liter

The vibrant metallic effect of this paint is enhanced by the brilliance of silver. The color achieves its metallic appearance through real metal pigments, giving the wall paint a shimmering surface that varies depending on the light.

1. Using a damp Alpina roller, evenly apply the color in a saturated manner and distribute it horizontally. The more paint applied, the stronger the structural lines will be. It’s best to work in strips of 50 – 100 cm. Tape off corner areas about 2 cm wide and either leave them blank or apply material there with a brush.

2. Immediately pull the Alpina effect comb from top to bottom with light pressure as far as possible. Then, work the comb back into the existing strip from bottom to top, allowing it to fade gently at the edges. Allow to dry for 12 hours.

3. After drying, evenly distribute the metallic effect with the small Alpina roller and

4. also immediately pull it from top to bottom with the effect comb.

Product Features:

Effect paint for an elegant silver shimmering metallic look

Can be combined with Creative Effect Line Play

Coverage: 1 liter for approximately 7–10 m²

Contains real metal pigments

Water-dilutable and low-odor

Substrate:

The suitable substrate must be dry, firm, and load-bearing.

We recommend applying the metallic effect over the line effect.

The metallic effect is suitable for the following interior surfaces:

Smooth walls

Well-adhering textured or structural wallpapers

Alternatively: suitable non-woven wallpapers

Gypsum board

Ceiling panels

Dispersion paint finishes.