Airfit Internal waste water reducer DN 110x90, for HT/KG pipe, PP

Fire behavior tested according to DIN 4102-B2, EN 13501-1-E, EN 11925-2, tested and approved Z-42.1-366 (DIN EN 1451-1), DN 110 x 40 (eccentric design, without approval), DN 108 x 50 (eccentric design, blue, for inner diameters 101-103 mm)

Installation note according to § 13 NAV

Please note that devices with a connection value of 230V are delivered either with a protective contact plug or a fixed connection (without plug), depending on the power rating. If the device has a fixed connection, a qualified company should be commissioned for the installation. All devices with a connection value of 400V and above must be operated via a suitable high-voltage connection and may only be connected by a qualified electrician. For devices with a rated power of more than 12KW, approval from your network operator is required. Please contact the network operator or an installation company registered in the network operator's installer directory before installation. Such an installation company will assist you in obtaining the necessary approval from the respective network operator.