ABB S203P-C63 Automatic circuit breaker 63A pro M compact 3-pole

ABB Stotz S&J Circuit Breaker S203P-C63

Manufacturer: ABB Stotz S&J
Designation: Circuit Breaker C, 15-25 kA, 63 A, 3P
Type: S203P-C63
Installation Depth: 69 mm
Tripping Characteristic: C
Number of Poles (total): 3
Number of Protected Poles: 3
Rated Current: 63 A
Rated Voltage: 400 V
Rated Insulation Voltage Ui: 440 V
Rated Impulse Voltage Uimp: 4 kV
Rated Short-Circuit Capacity Icn according to EN 60898 at 230 V: 12.5 kA
Type of Voltage: AC
Rated Short-Circuit Capacity Icn according to EN 60898 at 400 V: 15 kA
Rated Short-Circuit Capacity Icu according to IEC 60947-2 at 230 V: 25 kA
Rated Short-Circuit Capacity Icu according to IEC 60947-2 at 400 V: 15 kA
Frequency: 50-60 Hz
Energy Limitation Class: 3
Flush Mounting: No
Switching Neutral Conductor: No
Overvoltage Category: 3
Degree of Pollution: 3
Additional Devices Possible: Yes
Width in Division Units: 3
Protection Class (IP): IP20
Ambient Temperature during Operation: -25 to 55 °C
Connectable Conductor Cross-Section Multi-Wire: 0.75 to 16 mm²
Connectable Conductor Cross-Section Single-Wire: 0.75 to 25 mm²
Explosion-Proof: No

The S 200 P series circuit breakers protect cables and wires from overload and short circuits in accordance with DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction standards DIN VDE 0641-11 or IEC/EN 60898-1, DIN VDE 0660-101 or IEC/EN 60947-2, and UL 1077. For better visibility during wiring, the connection opening for wires is located above the connection opening for the phase rail. Conductor cross-sections of up to 25 mm² can be directly connected to the device via the terminal with insulation in protection class IP20. The extensive range of accessories provides everything you need for your installation tasks. Numerous approvals make the S 200 P suitable for worldwide use. Each device undergoes three intensive tests for quality and performance before delivery.