
Best Topeak products in the Bike repair stands category
On this page you'll find a ranking of the best Topeak products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Topeak Tune Up
Heavy bikes like e-bikes require a stable bike stand. The Tune-Up Stand X from Topeak has been specifically designed to meet these high demands. The hooks can be individually adjusted to the chainstay and seatstay in three positions. Since the rear tire does not touch the ground when properly adjusted, maintenance work on the drivetrain can also be carried out easily. The base can be easily detached from the carrier using a twist lock, allowing you to store the carrier compactly when it is not in use.

2. Topeak Prepstand Elite
The high-quality stand made from lightweight aluminum tubes and extra-strong plastic allows for an infinitely adjustable working height from 125 cm to 180 cm. The tripod support provides a large base area, ensuring stability. The robust steel quick-release mechanism is suitable for tube diameters from 19 mm to 45 mm and can be rotated 360°. Large knobs enable quick and precise adjustments. The legs and main tube can be quickly and space-savingly folded together using the clamp. Includes a transport bag and small parts container. Tour Magazine 02/13 rating: 1.7. Bike 02/2012 test result: Very good. MountainBIKE 3/10 test result: Very good.

3. Topeak PrepStand eUP PRO assembly stand, with lifting assistant, for EBikes with 4 feet, foldable, up to 30
The PrepStand eUP Pro from Topeak is a new foldable assembly stand with pneumatic lifting support, making it the ideal workstation for e-bikes and other heavy bikes. The wide, extra-long feet are complemented by two additional rear supports, ensuring necessary stability even with heavy loads. A foot pedal with a built-in pressure cartridge supports your bike with up to 17 kg when lifting and lowering, allowing bikes with a total weight of up to 35 kg to be comfortably brought to the right working height. The 360° swiveling mounting arm aligns your bike perfectly for repairs, maintenance, or cleaning. The rubber-coated clamping jaws accept tube diameters from 22.2 to 76.2 mm and protect the sensitive surface of your frame. The width of the clamp can be easily and precisely adjusted to your bike with the crank. An additional 4-inch wheel makes it easy to reposition the stand. When folded, the Topeak PrepStand eUP Pro can be reduced to a size of 112 x 24 x 21 cm for space-saving storage. This also makes the patent-pending assembly stand the ideal companion when traveling with the e-bike.
Features:
- Lift assistant supports up to 17 kg (with a total load of 35 kg)
- Operation by foot pedal via built-in pressure cartridge
- Wide stand surface with 4 feet for secure stability
- Clamping with gentle rubber jaws and 360° rotatable
- Clamping width: 22.2 - 76.2 cm adjustable with crank
- Working height: 107 - 149 cm (height of clamping)
- Compactly foldable
- Additional 4-inch wheel for easy movement of the stand
- Max load: 35 kg
- Dimensions: 114 x 112 x 92 cm (opened) / 112 x 24 x 21 cm (folded)
- Weight: 14 kg
Scope of delivery:
1 x Topeak PrepStand eUP Pro assembly stand.

Topeak PrepStand eUP PRO assembly stand, with lifting assistant, for EBikes with 4 feet, foldable, up to 30
4. Topeak Bike Truss 3X
Unique, adjustable 3-point clamp design for use with a kickstand to ensure better stability and prevent damage to thin-walled and aerodynamically shaped frames. Compatible with almost any bike frame thanks to adjustable clamp length, four contact points and rubber bands. During work, the included and length-adjustable handlebar stabiliser fixes the front wheel and handlebars. Compatible with Topeak PrepStand Pro, PrepStand Elite, PrepStand eUP and other mounting stands with clamps. Folds up compactly for storage and transport.

5. Topeak Flash Stand MX
Minimalist foldable stand for bicycles with a hollow axle crank. Simply lift the rear wheel to mount the bike on the bike stand in seconds.
- Suitable for: 1 bike
- Load capacity: 18 kg
- Foldable
- Weight (approx.): 1.8 kg
- Compatibility: Bicycles with a crank with a hollow axle (more than Ø 20 mm)

6. Topeak The Third Hook (upper)
Compatible with iPhone 6 / 6s. Specifically designed for the iPhone 6 / 6s to provide ultimate protection against water and dirt. The weatherproof shield allows access to the touchscreen and is compatible with Touch ID, whether it’s wet or dry.
Important Note: Due to the precise fit of the Weatherproof RideCase with the iPhone 6 / 6s, all screen protectors on the front, back, and sides must be removed before installing the Weatherproof RideCase.

7. Topeak The Third Hook (lower)
Lower hook for bike holder TuneUP and TwoUP

8. Topeak Prepstand Arm Set
The grab arm for the Topeak Prepstand Arm Set is an essential replacement part for any owner of a Topeak Prepstand work stand. Manufactured by the well-known brand Topeak, this grab arm is designed to provide a secure and stable hold for your bike during repairs and maintenance. It is a high-quality replacement part specifically developed to fit perfectly on the Topeak Prepstand work stand. Thanks to its robust and durable construction, you can be assured that this grab arm will be a reliable companion for many more years. Whether you are an enthusiastic cyclist or a professional mechanic, the Topeak Prepstand Arm Set grab arm will offer you high usability while working on your bike. Its smart design allows you to quickly and easily make precise adjustments, saving you time and optimizing your repairs. Additionally, this grab arm is easy to install and use. Simply attach it to the Topeak Prepstand work stand using the secure locking mechanism, and you can start your repair work right away. Its handling is intuitive, allowing you to focus on your task without hassle or complications. Whether you need to replace a damaged grab arm or simply require a spare, the Topeak Prepstand Arm Set work stand grab arm is a great choice. Trust in the quality and reliability of Topeak when it comes to keeping your bike in top condition. Add the grab arm for the Topeak Prepstand Arm Set to your collection of repair tools now and tackle your bike's maintenance and repair tasks easily, safely, and efficiently.

9. Topeak Thirdhook top for TwoUp Stand
The Thirdhook from Topeak is a high-quality additional hook unit specifically designed for the TwoUp Stand. This bike stand provides a reliable solution for securing bicycles and is ideal for workshops or hobby mechanics. Made from robust, CNC-machined aluminum, the Thirdhook ensures long-lasting use and stability. The use of aluminum not only keeps the weight low but also offers high strength, making it a practical addition for any cycling enthusiast. The Thirdhook is easy to install and allows for flexible handling when working on bicycles. With this accessory, the use of the TwoUp Stand becomes even more efficient and comfortable.
- CNC-machined aluminum for high stability and durability
- Allows for flexible securing of bicycles
- Easy installation and handling.

10. Topeak FlashStand
The FlashStand by Topeak is a compact and practical bike stand that is ideal for use on the go. It allows for easy and precise adjustment of the gears, making it an essential tool for cycling enthusiasts. Weighing only 0.5 kilograms, it is easy to transport and can be effortlessly stored in any bike bag. The stand is made from durable fiberglass and aluminum, ensuring high stability and longevity. Its foldable design allows for space-saving storage, while the maximum load capacity of 14 kilograms ensures that it is suitable for most bicycles. The FlashStand is not only functional but also thoughtfully designed to meet the needs of cyclists.
- Compact and lightweight design for mobile use
- Foldable for easy storage and transport
- Maximum load capacity of 14 kg for versatile applications.
