Best Ich-zapfe products in the Beverage dispenser accessories category

On this page you'll find a ranking of the best Ich-zapfe products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Ich-zapfe Carbon dioxide capsules CO2, 10 pieces, 16g

Carbon dioxide capsules CO2 - 10 pieces pack of 1016g. Capsules CO2 carbon dioxide capsules are used in e.g. taps for 5 litre party kegs: Profi-Tap, Father's Daytaps, Braufrisch 2000- small pressure reducers: CO2-Automatic, CEOMAT hose connection, KEG-CEOMAT with 5/8" or 3/4" screw connection- taps: Morphy Richards ZapfProfi, Draft&Fresh, Bier Maxx. 

2. Ich-zapfe Cleaning container 5l (fitting to choose from)

Cleaning container 5l (fitting to choose from) - for gastronomic use maximum 1 x per week recommended The colour and finish may vary. Consists of: Cleaning Bottle5L  Dispensing head, your choice: without, flat, combi, basket, Köpi The plastic fitting for cleaning containers to choose from.   High quality plastic cleaning container for the cleaning of your dispensing system Regular cleaning is essential for the smooth operation of your dispensing system andgood hygiene when serving is essential. With this Cleaning container plasticthe professional cleaning of your beer dispenser is done in no time.The plastic cleaning container has a capacity of five litres andis suitable for the Cleaning of tapping plants in various versions. Why regular cleaning is important for tapping systems Beer is a food. For the operation of a tapping plant, it is therefore necessary to be able to operate both in the privatearea as well as in the catering trade, to pay attention to sufficient hygiene. Because with theTime can vary from the beer hoses to the calming queue to the tapform deposits in the entire plant.These not only impair the taste of the beer, but also represent theideal breeding ground for germs and can therefore sooner or later even become abecome a health risk.By professional cleaning with a suitable cleaning container andcleaning agents, this can be avoided and the tap system is reliably protected from depositsfree. To use the cleaning container for your dispensing system First fill the cleaning container with water and a suitableCleaning agent, which you can of course also order from our shop.Now connect the cleaning container with a suitable plastic fitting to yourtap and open the tap.As soon as cleaning fluid runs out, close the tap again. Wait nowfor 20 to 25 minutes, so that the cleaning agent has time to remove dirt from theto loosen beer lines. Then open the tap and let the completeRun out cleaning water.Afterwards you have to Cleaning container only twice complete with clearFill up with water and tap empty. In this way you rinse the remains of the cleaning agentfrom the plant. Once this is done, your dispensing system is ready for use again. Buy plastic cleaning containers online Buy the plastic cleaning container from our shop and benefit fromproven quality at a reasonable price. Order accessories like professionalcleaning agent and the suitable plastic fitting, which you need for connecting thecleaning container to your beer dispenser, preferably at the same time, so that you can start with the first cleaning immediately after delivery. 

3. Ich-zapfe Thermo container, drinks container with tap 10 litres

Thermal container, thermal drinks container, drinks container with tap - 10L Our 10-litre thermal container is the perfect companion for parties, gatherings andoutdoor events. With this insulated beverage container, you can keep your favourite drinks at the right temperature. Features: 10 litre capacity - enough for a large quantity of drinks Double-walled insulation - keeps hot drinks hot and cold drinks cold Beverage container with tap - for easy and effortless dispensing.Fold-out feet and carrying handle - for easy transport and convenient operation Height with feet extended only 6 cm - space-saving and handy Materials: Stainless steel and plastic - durable, stable and food-safe Weight in kg: 2.62 - light and handy to transport Height in cm: 44 - perfect for use at any event Diameter in cm: 24 - sufficient for a large quantity of drinks Our drinks container is an outstanding helper for any event. Its high quality and durability guarantee many years of use. This container is made from the best materials and its insulating effect is impressive. The tap allows you to pour your drinks quickly and easily. The fold-out design offers you unique operation, while the carrying handle makes it easy to transport. Enjoy your drinks at the right temperature with our thermal container, thermal drinks container, drinks container with tap - 10 litres. 

4. Ich-zapfe Fitting Screw-on cleaning container

Fitting for plastic cleaning container   - available as flat, combination, Köpi or basket fitting (please select the appropriate fitting when ordering).

5. Ich-zapfe Bellows for tap cleaning

Bellows for bar tap cleaning with P & R blowback ball - transparent- with P&uum recoil ball.

6. Ich-zapfe Cleaning Bottle 5L made of plastic for beer dispenser cleaning

Cleaning Bottle 5L made of plastic for beer dispenser cleaning   - for gastronomic use maximum 1 x per week recommended The colour and finish may vary. The plasticfitting for cleaning container must be ordered separately and is not included in the scope of delivery. See article: B1135 High quality plastic cleaning container for the cleaning of your dispensing system Regular cleaning is essential for the smooth operation of your dispensing system andgood hygiene when serving is essential. With this Cleaning container plasticthe professional cleaning of your beer dispenser is done in no time.The plastic cleaning container has a capacity of five litres andis suitable for the Cleaning of tapping plants in various versions. Why regular cleaning is important for tapping systems Beer is a food. For the operation of a tapping plant, it is therefore necessary to be able to operate both in the privatearea as well as in the catering trade, to pay attention to sufficient hygiene. Because with theTime can vary from the beer hoses to the calming queue to the tapform deposits in the entire plant.These not only impair the taste of the beer, but also represent theideal breeding ground for germs and can therefore sooner or later even become abecome a health risk.By professional cleaning with a suitable cleaning container andcleaning agents, this can be avoided and the tap system is reliably protected from depositsfree. To use the cleaning container for your dispensing system First fill the cleaning container with water and a suitableCleaning agent, which you can of course also order from our shop.Now connect the cleaning container with a suitable plastic fitting to yourtap and open the tap.As soon as cleaning fluid runs out, close the tap again. Wait nowfor 20 to 25 minutes, so that the cleaning agent has time to remove dirt from theto loosen beer lines. Then open the tap and let the completeRun out cleaning water.Afterwards you have to Cleaning container only twice complete with clearFill up with water and tap empty. In this way you rinse the remains of the cleaning agentfrom the plant. Once this is done, your dispensing system is ready for use again. Buy plastic cleaning containers online Buy the plastic cleaning container from our shop and benefit fromproven quality at a reasonable price. Order accessories like professionalcleaning agent and the suitable plastic fitting, which you need for connecting thecleaning container to your beer dispenser, preferably at the same time, so that you can start with the first cleaning immediately after delivery. 

7. Ich-zapfe 5 litre beer keg adapter, metal version, beer

Professional 5 liter can adapter for connection to a conventional dispensing system! -Very stable and durable metal design -Enjoy freshly tapped beer in smallquantities Thanks to the beer tap you can remove the beer hose! - the beer remains safely stored in the barrel! - incl. built-in check valve, for clean piercing Handling: 1) Press the riser tube into the drum until the holder engages at the edge! 2) Attach the beer and Co2 hose to the adapter! Co2 - Input 3/4 inch Beer outlet 5/8 inch. 

8. Ich-zapfe CNS standpipe, 270 mm long

Standpipe made of CNS - 270 mm long - one side 1 1/2 " - other side 1 1/4" rubber cone - suitable for 1 1/2" and 1 1/4" flush tank drain valve! - Suitable for allsinks with a depth of 300 mm!   Suitable sinks see below!. 

9. Ich-zapfe Alcohol meter for wine, wine scale with thermometer

Alcohol meter for wine, wine scale with thermometer For precise determination of the alcohol and residual sugar content, even in fermenting wines. Based on the principleof double density measurement: first a determination with alcohol and then a determination without alcohol (after evaporation). Requires a 250 ml measuring cylinder. Length: 31 cm. With overview table. width: 2.50 cm height: 2.50 cm length: 32.00 cm weight: 0.07 kg. 

10. Ich-zapfe Slangeskærer - stabilt helmetal design - 22mm

Slangeskærer - stabilt helmetal design - 22mm.