Schabus Cable fume hood control

The use of the cable exhaust control KDS 116 allows an exhaust system to be used only when the window is open and the necessary supply air can flow into the room. A magnetic switch on the window sash monitors whether the window is open or closed and transmits this information via a thin cable to the control unit. The power supply is only released when the window is tilted or opened.

The control line is connected to the control unit and the magnetic switch. It is ideal for retrofitting when a control line with 2 wires has already been installed. The control unit is equipped with a potential-free changeover contact and can thus be interposed in the fan motor supply line of the extractor hood, allowing the lighting of the extractor hood to function independently of the window position.

The system can be combined with an additional cable magnetic switch KMS 098K22 for a second window. At least one window must be open for the exhaust system to be activated. The KDS 116 can be easily combined with window contacts that many window manufacturers offer with an integrated switch contact (normally open/normally closed).

As soon as the exhaust gas temperature in the exhaust pipe exceeds 40 degrees, the window must be opened. Exhaust gas temperature monitor ATW 519 for KDS 110/116.

Technical data: Operating voltage: 230 V/50-60 Hz, power consumption: approx. 2 W, relay switching capacity: 3500 W/16 A, relay switching capacity: 2000 VA/8 A, control voltage: 18 V, cable length: 6 m (extendable), operating range: -15 °C/+40 °C, protection class: IP 20, control unit (HxWxD): 51x51x26 mm, magnetic switch (HxWxD): 55x15x18 mm, magnet (HxWxD): 55x15x18 mm, spacer plate (HxWxD): 55x15x5 mm.