Questions about Xiaomi Smart Humidifier 2

Hi, it worked for us for a few months. We simply took the water from the tap. However, our appliance had a fault and water just ran out recently. It broke down. Out of interest, I took it apart and saw that the transducer was poorly attached to the housing. As a result, water got onto the circuit board and it burnt out. Overall, the device worked very well. Fortunately, Galaxus is a very good company and they refunded me the cost.

I have installed two of these humidifiers. One in the bedroom and one in the studio. Both are over 20m2 and the humidification works perfectly. Probably works up to approx. 40m2 (i.e. living room size)

This model is "only" a humidifier (but in my opinion a very good one). It does not have a filter or anything similar.

Yes you can. There is a little box to do so.

It's the same for me, but it shuts down. Software update should help

There is no information at all in the instructions. In terms of output power (3.5l/h) it is comparable with Stadler Form Oskar 18W. Would say 50m2. Maybe that will help you as food for thought :-) LG, Marco

I have filled it to the maximum and it is tight. You are probably dealing with a defect

I think they are the same perhaps a newer model?

Yes, no filter is required.

I‘d say for small rooms up to around 2.5 x 4 m

Hello Sergej. It says on the packaging "works with alexa" and "works with Google Home". I haven't integrated it myself yet, but I assume that both are supported.

Yes, the appliance has a fragrance compartment

Cleaning the lid with a moving funnel Switching off and disconnecting the humidifier: Before starting cleaning, ensure that the humidifier is switched off and disconnected from the electrical outlet for safety reasons. Remove lid: Gently lift the lid with the mobile steam funnel. Cleaning with soft cloth: Use a soft, damp cloth to remove dust and residues. Avoid the use of aggressive cleaning agents that could damage the material. Drying: After cleaning, dry the cover thoroughly with a dry, soft cloth to prevent residual moisture. General cleaning of the humidifier Weekly cleaning: We recommend cleaning the entire device at least once a week. Use a soft, damp cloth to clean the main body and the filter casing. Limescale removal: If you notice the presence of limescale, prepare a solution of citric acid and water (about 1 teaspoon of citric acid in 1 litre of water). Pour the solution into the tank and leave it for a few minutes, then gently scrub with a cotton wool pad or a soft bristle brush. Rinse thoroughly with clean water. Cleaning the atomiser: Clean the atomiser with a soft cloth or cotton wool. After filling the tank with water, shake it gently to remove any residue, then empty it. Additional tips Use of distilled water: To prevent the build-up of minerals and limescale, it is advisable to use distilled or demineralised water. Avoid the use of essential oils: The use of essential oils can damage the humidifier and impair air quality. Dry completely: After each cleaning, ensure that all parts are completely dry before reassembling and reconnecting the humidifier.

Yes, there is one, and it can be switched off via the app.

Hello, What is your question ?

There seems to be a problem with your order. In this case, we will refer you to our Galaxus Assistant, which provides direct contact options so that you can be helped accordingly. https://www.galaxus.ch/help

Unfortunately, I couldn't find any Xiaomi flavour pads in the range. But as it is generally easy here. Other pads from manufacturers should generally also work, at most they need to be cut to size a little. E.G: Beurer LB 37 flavour pads (10 x)

no

The appliance has an automatic control that keeps the humidity constant, which indicates that a hygro sensor is present. This sensor enables the appliance to automatically adjust the humidity output to ensure optimum humidity levels and avoid excess humidity.

The humidifier ensures better air quality in a room with an area of up to 70 m2.